STREET WISE SWVK9 Manual

STREET WISE SWVK9 Manual

Virtual k9 barking dog alarm

Advertisement

Quick Links

SWVK9
Virtual K9 Barking Dog Alarm

INTRODUCTION:

The Virtual K9 Barking Dog Alarm by Streetwise Security Products uses microwaves to "see"
through walls and detect someone approaching your home or business. It can activate an
alarm or the sound of a barking dog to scare away an intruder. It can also be used as an
automatic doorbell to alert you to visitors approaching your home or customers approaching
your business. There is also an SOS button on the remote control that will instantly sound an
alarm in case of an emergency.

IMPORTANT:

1. Do not expose unit to direct sunlight or rain; for indoor use only.
2. Keep the unit away from heat sources such as heaters and stoves as this could affect the
Detection Range or cause the unit to turn on randomly.
3. The unit monitors 360 degrees but the largest detection range is on the backside.
Therefore, when monitoring the front of your home the backside should face toward
the outside wall and the front (with speaker holes) should face inward toward the room.

Features:

1. Long range (50+ feet) remote control works through walls.
2. Detects motion through walls.
3. Three different modes: doorbell (chime), barking dog, or alarm.
Revised 01-18-2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SWVK9 and is the answer not in the manual?

Questions and answers

Summary of Contents for STREET WISE SWVK9

  • Page 1 SWVK9 Virtual K9 Barking Dog Alarm INTRODUCTION: The Virtual K9 Barking Dog Alarm by Streetwise Security Products uses microwaves to “see” through walls and detect someone approaching your home or business. It can activate an alarm or the sound of a barking dog to scare away an intruder. It can also be used as an automatic doorbell to alert you to visitors approaching your home or customers approaching your business.
  • Page 2 4. Eight volume levels can be adjusted using the button on top of the unit. Maximum volume is about 120dB. 5. Remote control can be used to arm/disarm, change sound mode, or activate an instant alarm (SOS). 6. Operates on AC power (adapter included). 7.
  • Page 3 (side view) 2. Plug the AC adapter into the port located on the back side of the unit marked “DC” and plug it into a standard wall outlet. As soon as the unit is plugged in it will turn on. To turn the unit off press the ON/OFF button on the remote or on the top of the unit.
  • Page 4 1. When the batteries are installed or the power adapter is connected, the “POWER” LED and “ARM” led will illuminate. 2. Press the Select button on either the remote control or the top of the unit to choose barking, alarm, or door bell. 3.

Table of Contents