Advertisement
Quick Links
Advertisement
Summary of Contents for iDigit Logger Pro A610
- Page 1 Instruction Manual Bluetooth Thermometer Logger Pro...
-
Page 2: Main Unit
Main Unit Location of Control 1. Power On/Off 2. Pair 3. Reset 4. Temperature Probe 5. Battery Compartment 6. Battery Door... - Page 3 Features Thanks you for purchasing the BTL - Pro. This product is designed as a BTL- Pro by working with Ipad, Iphone , IPod or other IOS devices. • Support IOS version 7.1 or above • Support Bluetooth version 4.0. •...
-
Page 4: Getting Started
Getting started Install battery: 1.1 Re-tight the screw and open the battery door. 1.2 Insert AAA x 2 batteries in polarity (+) and (-) as indicated. 1.3 Close the battery Door and tighten the screw. Install BTL App on your device. 2.1 Access App Store and search for “BTL”. - Page 5 Pairing the BTL Pro 3. Pair the BTL Pro with the BTL app. 3.1 Before running the BTL app, make sure the Bluetooth in turned ON at your I-device. 3.2 After you tap the app icon , the ‘Nearby Devices’ screen appears.
- Page 6 Pairing the BTL Pro 3.3 Press the “Pair” button of the BTL Pro. The new BTL_XXXX will be displayed on the App “Pair New Device’, it is ready for Pairing. Tap the BTL_XXXX will start the pairing and connection process. The BTL Pro will BI-BI sound. Once the BTL-Pro is paired.
- Page 7 View the Maximum - Minimum and Average reading During started the experiment. User can slide the temperature reading to view the Maximum - Minimum or Average reading of the experiment.
- Page 8 Edit the Experiment name: Edit the Experiment name Tap the experiment name location. User can edit the name of the experiment.
- Page 9 Set the Experiment Parameter Start the experiment. User need to set some parameter at the first use, otherwise it will use the default setting. For next experiment, user can use the pervious setting or setting again.
- Page 10 Set the Temperature Alert & Change the temperature reading You can set the range of the temperature alert. Use the rolling dial to set the Maximum and Minimum temperature. Press the Done to confirm the setting. If the measure temperature out of the setting. It will pop –up message and alert sound.
- Page 11 Set the Sampling interval You can set the sampling interval by temperature or time. For temperature, Use the rolling dial to choice the desired working period. Press the Done to confirm the setting. For time, slide the switch to ON to enable continuous mode. Press the Done to confirm the setting.
- Page 12 Set Sampling interval section number You can choice the no. (1-5) of section for the sampling. Use the rolling dial to choice the desired sampling section number. Press the Done to confirm the setting.
- Page 13 Recorded You can check your record by press the Recorded at setting menu. Press the Recorded you can view the history of record.
- Page 14 Share the information You can share the cooking information include Image / PDF and CSV through the social app, which install at your idevice.
- Page 15 Notes Writing You can write notes on your aexperiment record by tap “ Add Notes ”. The notes will attach to your experiment record history and can share through the information sharing device.
- Page 16 RTL Pro unit space buzzer Manufacturer reserves the right to update the contents of this manual and App.
- Page 17 Disposal of Your Old Product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
- Page 18 x x x - x x x x x x...
Need help?
Do you have a question about the Logger Pro A610 and is the answer not in the manual?
Questions and answers