TV, COMPONENT, VIDEO and S-VIDEO modes
(You can't set PC mode in this menu. Use the TV/AV button)
External equipment inputs: VIDEO or S-VIDEO mode are used for video
devices like
VCRs, DVDs, etc.), COMPONENT, is used for component type devices.
Note: If a VCR is connected to the antenna jack, use TV mode. See External
Equipment Connection section.
1. Press the MENU- button.
2. Select the Special menu.
3. Press the CH▲▼ button to select Input.
4. Press the VOL ◀▶button to select TV, COMPONENT, VIDEO
and S-VIDEO.
COMPONENT: Device connected to the COMPONENT INPUT jacks.
VIDEO: VIDEO device connected to the TV's VIDEO input.
S-VIDEO: S-VIDEO device connected to the TV's S-VIDEO input.
Note: You can also select the TV, COMPONENT, VIDEO, or S-VIDEO sources
using the TV/AV button.
PC: PERSONAL COMPUTER connected to the PC socket of the set
Alternatively you can select the TV, COMPONENT, VIDEO, S-VIDEO and
PC modes by pressing the TV/AV button.
Auto sleep
If you select Auto sleep on the set will automatically switch itself to
standby mode approximately ten minutes after a TV Channel stops
broadcasting.
1. Repeatedly press the MENU- button to select the Special menu.
2. Press the CH▲▼ button to select Auto sleep.
3. Press the VOL◀▶ button to select On.
4. Press the TV/AV button to return to normal TV viewing
Blue Back
Channels without a program signal appear in blue.
Other functions
19