Summary of Contents for MySmartBlinds Smart Switch
- Page 1 SMART SWITCH User’s Manual This product is to be used with the MySmartBlinds automation kit.
- Page 2 TABLE OF CONTENTS SAFETY INFORMATION PARTS IDENTIFIER ABOUT THE SMART SWITCH INSTALLATION PAIRING TO THE APP USING THE SMART SWITCH LIMITED WARRANTY...
- Page 3 If this equipment does cause harmful interference to radio or television reception, which can Do not use the Smart Switch for anything other than its be determined by turning the equipment off and on, the intended purpose. Any usage of any part of the Smart...
- Page 4 (Fig. 1). closing groups of blinds quick and simple. Instead of opening the app on your smart device, use the simple controls on the Smart Switch remote to open and close 2. Remove the adhesive groups of blinds.
- Page 5 LEDs will blink. 8. Continue assigning blinds to as many of the 5. Enter a name for your Smart Switch, and tap colored groups as needed; tap SAVE when you NEXT.
- Page 6 (B). Each tap will tilt the blinds in 45° increments. For more fine-tuned positioning, hold down the up or 1. To wake up the Smart Switch, tap any button down buttons. on the remote (B), and the light for the selected group will start to blink.
- Page 7 MySmartBlinds offers a limited 90-day warranty on does not cover installation of repaired or replace- the hardware components of its Smart Switch. If a ment items. If we send replacement parts, we may defect in the hardware, or any component thereof, use new or reconditioned parts.
- Page 8 PRACTICABLE OR CANNOT BE TIMELY MADE, A REFUND OF THE PURCHASE PRICE. IN NO EVENT Use of the MySmartBlinds Smart Switch with any SHALL THE LIABILITY OF MYSMARTBLINDS other system or components (including affixing RELATED TO ANY PRODUCT EXCEED THE PUR- non-MySmartBlinds attachments or accessories) CHASE PRICE OF THE PRODUCT.
Need help?
Do you have a question about the Smart Switch and is the answer not in the manual?
Questions and answers