Cooking; Keep Warm; Quick 30 - Panasonic NN-GT69KS Owner's Manual

Cooking

1
If cooking at high power (10),
skip to step 2. Press Power
Level until the desired power
level appears in the display.
P10 is the highest and P1 is the
lowest. P0 is the keep warm
feature.
Press Power Level
once P10 (HIGH)
twice P9
3 times P8
4 times P7 (MED-HIGH)
5 times P6 (MEDIUM)
6 times P5
7 times P4
8 times P3 (MED-LOW)/
DEFROST
9 times P2
10 times P1 (LOW)
11 times P0 (KEEP WARM)
2
Set Cooking Time using the
Time buttons. P10 (HIGH) and
P0 (KEEP WARM) have max.
cooking time of 30 minutes. For
other power levels, the max.
time is 99 minutes, 50 seconds.
F0003CB00CP_07.indd 13
Operation (continued)
3
Press Start; the cooking will
start and the time will count
down in the display. At the
end of cooking, five beeps will
sound.
NOTES:
1. After pressing Start, the
selected power level can
be recalled. Hold Power
Level for 2 seconds, then the
display window will indicate
the power level and keep for
2 seconds.
2. For reheating, use P10 (HIGH)
for liquids, P7 (MED-HIGH) for
most foods, and P6 (MEDIUM)
for dense foods.
3. For defrosting, use P3
(MED-LOW).
DO NOT OVERCOOK:
This oven requires less time
to cook than older units.
Overcooking will cause food to
dry out and may cause a fire.
A microwave oven's cooking
power tells you the amount of
microwave power available for
cooking.
Multistage Cooking:
For more than one stage of
cooking, repeat steps 1 and
2 for each stage of cooking
before pressing Start. The
maximum number of stages
for cooking is three. When
operating, two beeps will
sound between each stage.
Five beeps will sound at the
end of the entire sequence.
Automatic function (such as
Turbo Defrost, Coffee/Milk,
Sensor Reheat, Popcorn,
Sensor Cook, Auto Grill and
Frozen Foods) can not be used
with 3-stage cooking.

Keep Warm

(Will keep food warm for up to
30 minutes after cooking)
1
Press Power Level 11 times to
select the P0 (KEEP WARM).
2
Set warming time using Time
buttons (up to 30 minutes).
Set 2 minutes cooking for an
example.
3
Press Start; the cooking will start
and the time will count down
in the display. At the end of
cooking, five beeps will sound.
NOTES:
1. P0 (KEEP WARM) can be set
as the final stage after cook
time has been manually
entered. It cannot be used
with Automatic function
(such as Turbo Defrost,
Coffee/Milk, Sensor Reheat,
Popcorn, Sensor Cook, Auto
Grill and Frozen Foods).
2. After pressing Start, the
selected power level can be
recalled. Hold Power Level
for 2 seconds, then the
display window will indicate
the power level and keep for
2 seconds.
13

Quick 30

(Set or add cooking time in
30 seconds increments)
1
Press Quick 30 until the
desired cooking time (up to
5 minutes) appears in the
display. Power Level is pre-set
at P10.
2
Press Start; the cooking will
start and the time will count
down in the display. At the
end of cooking, five beeps will
sound.
NOTES:
1. If desired, you can use
other power levels. Select
desired power level before
pressing Quick 30.
2. After setting the time
by Quick 30 button, you
cannot use the Time
buttons.
3. Quick 30 button can also
be used to add more time
during manual cooking.
4. It cannot be used with
Automatic function (such as
Turbo Defrost, Coffee/Milk,
Sensor Reheat, Popcorn,
Sensor Cook, Auto Grill and
Frozen Foods).
2019/1/31 13:06:56