7-BIT Sum A1200 Quick Manual page 2

Quick Guide
The process of connecting the adapter should ALWAYS be performed with your Amiga being TURNED OFF.
Sum USB A1200 adapter has been designed for installation inside Amiga A1200 computer.
Therefore please remove your Amiga A1200 case and find the U7 chip using the following picture as a guide.
Next you should place Sum adapter's socket on the U7 chip and push it gently in order to make it appropriately
attached to the chip.
Below you can see how correctly installed
adapter looks like.
WARNING!!!
One should pay special attention to connecting USB cable to your Sum adapter in a correct way. Incorrect installation
may result in serious damage to the adapter, your Amiga computer and/or the connected USB device.
Correctly connected Sum adapter is ready to use.
For more information, as well as user manual download, please visit our website at: http://7-bit.pl
Connecting USB cable to your Sum adapter.
Pin no. 1 is marked in red.
This is the U7 chip you
are looking for.
Pin no. 1