Configuration Mode - 7-BIT Sum Series User Manual

Configuration mode

In order to activate configuration mode one should first run any text editor. Then R-Shift + Pause key combination should be pressed
(when using a Mac keyboard equivalent R-Shift + F19 applies). If configuration mode is successfully enabled, the appropriate text message
appears.
This is the list of available key assignments:

F1 – reset type - software (A2000,A3000,A4000,CD32,CDTV) or hardware (A600,A1200),

F2 – R-Amiga to R-Alt remapping,

F10 – displaying key codes (on/off),

F12 – displaying the configuration.
Disabling configuration mode can be achieved by additional pressing of R-Shift + Pause key combination (R-Shift + F19 for Mac keyboards).
Appropriate text message confirms it.
WARNING!!!
If resetting your Amiga does not seem to have any effect – please check the reset type setting (F1 key).
Sum 10