Electronic Unlocking Of The Transmission Lock; Launch Control; Engaging Selector Lever Position N; Start With Launch Control - BMW X5 Owner's Manual

Displays in the instrument
cluster
The selector lever position is dis‐
played, for example P.
Electronic unlocking of the
transmission lock
General information
Electronically unlock the transmission lock to
maneuver vehicle from a danger area.
Unlocking is possible, if the starter can spin the
engine.
Before unlocking the transmission lock, set the
parking brake to prevent the vehicle from rolling
away.

Engaging selector lever position N

1. Press and hold down brake pedal.
2. Press the Start/Stop button. The starter must
audibly start. Hold the Start/Stop button
pressed.
3. With your free hand, press the button on the
selector lever, arrow 1, and press the selector
lever into selector lever position N and hold,
arrow N, until selector lever position N is dis‐
played in the instrument cluster.
A Check Control message is displayed.
4. Release Start/Stop button and selector lever.
Online Edition for Part no. 01402896765 - X/18
Driving
5. Release brake, as soon as the starter stops.
6. Maneuver the vehicle from the danger area
and secure it against moving on its own.
For additional information, see the chapter on
tow-starting and towing, refer to page 384.

Launch Control

Concept
Launch Control enables optimum acceleration
on surfaces with good traction under dry sur‐
rounding conditions.
General information
The use of Launch Control causes premature
component wear since this function represents a
very heavy load for the vehicle.
Do not use Launch Control during the break-in,
refer to page 312, period.
Do not steer the steering wheel when driving off
with Launch Control.
Functional requirements
Launch Control is available when the engine is at
operating temperature. The engine is at operat‐
ing temperature after an uninterrupted trip of at
least 6 miles/10 km.

Start with launch control

1. Switch on drive-ready state.
2. Press the button.
TRACTION is displayed in the instrument
cluster and the indicator light for DSC OFF
lights up.
3. Engage selector lever position S.
4. With the left foot, forcefully press down on
the brake.
5. Press and hold down the accelerator pedal
beyond the resistance point at the full throttle
position, kickdown.
CONTROLS
147