Sony DSC-T5 Fall 2005 User's Manual / Troubleshooting page 68

4
View images on the computer.
Double-click the hard disk icon
desired image file in the folder
containing the copied files to open that
image file.
To delete the USB connection
Perform the procedures listed below
beforehand when:
• Disconnecting the cable for multi-use terminal
• Removing a "Memory Stick Duo"
• Inserting a "Memory Stick Duo" into the
camera after copying images from the internal
memory
• Turning off the camera
Drag and drop the drive icon or the
icon of the "Memory Stick Duo" to the
"Trash" icon.
The camera is disconnected from the
computer.
• If you are using Mac OS X v10.0, perform the
procedure above after you have turned your
computer off.
Creating a video CD using
"ImageMixer VCD2"
• You can create an image file that is compatible
with the video CD creation function. To save the
data in the video CD format on a CD-R, you
need Toast (not supplied) by Roxio.
68
To install "ImageMixer VCD2"
• Shut down all other application software before
you install "ImageMixer VCD2."
the
t
• The display settings should be 1024 × 768 dots
or higher and 32,000 colors or higher.
1 Turn on your Macintosh computer, and
insert the CD-ROM (supplied) into the
CD-ROM drive.
2 Double-click the CD-ROM icon.
3 Copy the [IMXINST.SIT] file in the
[MAC] folder to the hard disk icon.
4 Double-click the [IMXINST.SIT] file in
the copy-to folder.
5 Double-click the extracted [ImageMixer
VCD2_Install] file.
6 After the user information screen appears,
enter the desired name and password.
The installation of the software starts.
To start up "ImageMixer VCD2"
Open [ImageMixer] in [Application], then
double-click [ImageMixer VCD2].
For information on the use of the
software
Click [?] at the upper-right corner of each
screen to show the on-line help.
Technical support for "ImageMixer
VCD2" is provided by the Pixela User
Support Center. For more support
information, refer to the leaflet in the
supplied CD-ROM package.