Advertisement
Quick Links
Product installation steps:
1
7mm
1. The mounting brackets by icons
on the wall with screws.
3
3.The net cast out of the LOGO
signs.
5
5.The product installed on the
stent.
2
2.The word screwdriver bolt icon to
insert the location of the bolt down
onto the top.
4
4.Will be provided with the product
Hexagon Wrench insert LOGO just
out of position, The back of the slow
rotation of the mounting hole release
Clamp.
6
6. Hexagon Wrench used to clamp a
little tight solid product, and then
to the product required direction,
and then to fully clamp fastening,
LOGO will be back in situ marker.
Wall Mount Speaker
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
3
Advertisement
Related Manuals for ITC TS-9
Summary of Contents for ITC TS-9
- Page 1 Product installation steps: Wall Mount Speaker 1. The mounting brackets by icons 2.The word screwdriver bolt icon to on the wall with screws. insert the location of the bolt down onto the top. 4.Will be provided with the product 3.The net cast out of the LOGO signs.
- Page 2 Specifications: use of high voltage may cause electric shock or fire disaster. Is no pruning, distorted, or replacement of damaged wires. Model TS-9/9W Avoid instability in the installation or set up speakers, such as shaking 5W,10W,20W,40W,80W Power Taps@100V the table or flat surface, The speaker can avoid falling caused personal 2.5W,5W,10W,20W,40W...
Need help?
Do you have a question about the TS-9 and is the answer not in the manual?
Questions and answers