Page 1
INSTALLATION OPERATION AND MAINTENANCE INSTRUCTIONS EXHEAT INDUSTRIAL FLR & FLRA TYPE FLAMEPROOF RADIATORS Please read these instructions thoroughly before installation and ensure they are passed on to the end-user...
CAUTION – the liquid within the radiator contains glycol and must not be consumed. Should a leak occur the heater must be de-energised immediately and returned to Exheat Industrial Ltd for repair. Any leaks must be cleared up with care and hands washed immediately after contact.
DO NOT COVER the radiator and do not allow anything to rest on or against it. If a protective guard is required, only Exheat Industrial Ltd’s design is pre-approved and tested with the FLR range.
Any damage or faults should be notified to Exheat Industrial Ltd immediately. Any replacement parts required must be obtained directly from Exheat Industrial Ltd. The use of any other parts will void any certification and warranty. Equipment is certified for use in a hazardous area and reference should be made to EN60079-17 (especially table 1) &...
Carry out 3 monthly and 6 monthly checks as above. Check for element failure or low insulation resistance. Only Exheat Industrial Ltd can carry out rod type element replacements in hazardous area heaters, any unauthorised modifications will invalidate the hazardous area certification and any warranty.
Need help?
Do you have a question about the FLR Series and is the answer not in the manual?
Questions and answers