Related Manuals for Caladair Diablo F400-120
Summary of Contents for Caladair Diablo F400-120
- Page 1 ® ® DIABLO - DIABLO TWIN F400-120 SMOKE AND HEAT EXHAUST FAN OPERATING AND COMMISSIONING MANUAL 2015/03...
-
Page 2: Installation
® ® DIABLO - DIABLO TWIN F400-120 SMOKE AND HEAT EXHAUST FAN In compliance with the current norms, the machine should be installed only by a technical person qualified for this type of work. During installation, ensure that: - The machine is moved as given in chapter II.1. - The required personal protection devices are worn so as to avoid injuries caused by electrical and mechanical hazards (injuries by touching panels, sharp edges, etc.) - Electrical connections are made after the power supply has been shut off, in compliance with the recommen-... - Page 3 ® ® DIABLO - DIABLO TWIN F400-120 SMOKE AND HEAT EXHAUST FAN Outdoor installation DIABLO/DIABLO TWIN : To raise the Diablo (out of the water) you can use optionnal set of feet (PCB). From size 630 DIABLO TWIN is supplied with frame as standard equipment.
- Page 4 ® ® DIABLO - DIABLO TWIN F400-120 SMOKE AND HEAT EXHAUST FAN III.2 / 2 speeds motor (Dahlander) 2 Speeds - 1 tension (Dahlander) (400V) (4/8 et 6/12 poles) SAFETY SWITCH Low speed High speed III.3 / 2 Speeds motor (Separated coils) 2 Speeds - 1 tension (Separated coils) (400V) (4/6 et 6/8 poles) Safety switch Low speed...
- Page 5 ® ® DIABLO - DIABLO TWIN F400-120 SMOKE AND HEAT EXHAUST FAN IV / COMPONENTS IV.1 / Motor - The electrical conduits of the smoke exhaust fan do not need protection against overloads but only magnetic , in accordance with norm ref NFC15-100 , they must be dimensionned with highest overloads that motor can stand. Power supply must be provided by heat-resistant cables CR1.
- Page 6 ® ® DIABLO - DIABLO TWIN F400-120 SMOKE AND HEAT EXHAUST FAN IV.3 / DIABLO TWIN (KED TWIN)outdoor kit DIABLO TWIN Outdoor kit mounted in standard includes: A roof in 3 pieces (mounted) • Two motor covers (monted) • Two rain visors with grill on discharge (to be •...
-
Page 7: Maintenance
® ® DIABLO - DIABLO TWIN F400-120 SMOKE AND HEAT EXHAUST FAN VI /MAINTENANCE Before to start any intervention, you must electrically insulate the box with padlockable switch (IPC) on OFF position). VI.1 / Outside the fan box Check the ducts. VI.2 / Fans - Dust the wheel if necessary. -
Page 8: Breakdown Diagnosis
® ® DIABLO - DIABLO TWIN F400-120 SMOKE AND HEAT EXHAUST FAN VII / COMMISSIONING RECORDS ® ® To be sure that DIABLO DIABLO TWIN is correctly installed, compare informations on the motor plate and informations recorded on site Number of poles : 4 poles 4/8 poles 4/6 poles...