Page 2
CECON input shaft (Part No. with a preservative oil. Do not wash this protective 12) stationary while trying to rotate the output shaft coating from shaft ends or couplings. 2 Marland Clutch • 800-216-3515 P-1346-2-MC • 1/18...
Page 3
The use of improper lubricants could Evidence of damage caused by disregard of these cause a malfunction resulting in equipment instructions is readily traceable, and Marland Clutch damage. will not be held responsible for the failure of the affected part or parts.
Page 4
Improper maintenance methods are often instructions. If Marland Clutch has furnished the responsible for dirt and foreign matter getting into couplings, see Coupling Data Sheet enclosed with the oil, and subsequently, into the CECON housing.
Page 5
90 degrees until pressure is felt against the hand. Apply hand pressure only. Do not extend the handle length with a pipe or other means as damage may occur to the unit. Marland Clutch • 800-216-3515 P-1346-2-MC • 1/18 5...
Page 8
Marland Clutch’s obligation under this warranty is limited to the repair or replacement of the defective product and in no event shall Marland Clutch be liable for consequential, indirect or incidental damages of any kind incurred by reasons of manufacture, sale or use of any defective product. Marland Clutch either assumes nor authorizes any other person to give any other warranty or to assume any other obligation or liability on its behalf.
Need help?
Do you have a question about the CEUS M Series and is the answer not in the manual?
Questions and answers