Advertisement

Quick Links

Instructions when using for the first time
Inserting the batteries
1.
Taking a photograph
2.
Installing the driver
3.
Connecting the camera
4.
Loading photographs
5.
The steps for taking a photograph
Inserting the batteries
1.
2.
Checking the macro settings
Checking the resolution settings
3.
4.
Setting the flash
Printing
5.
1
Introduction
This instruction manual is for users of the TRUST 500FX POWERC@M FLASH.
This camera is suitable for making a maximum of 160 recordings. The camera has a
16 MB (128 Mbit) internal flash memory, a webcam function, a video function,
automatic exposure, a lens with a fixed focal length, an extra macro option and a
flash function.
It is also possible to increase the camera's memory using a Smart Media Card with a
maximum capacity of 128 MB (Mbyte).
2
Safety
2.1
General information
Carefully read the following instructions before use.
-
The TRUST 500FX POWERC@M FLASH does not require any special
maintenance. Use a slightly damp, soft cloth to clean the camera.
-
Do not use aggressive substances, such as petrol or white spirit, to clean the
device. These may harm the material.
-
Do not submerge the device in liquid. This may be dangerous and will damage
the device. Do not use this device near water.
-
Make sure nothing is placed on the cable. Do not use this device in an area
where the cable can become worn or damaged as a result of people walking
over it.
-
Do not repair this device yourself.
2.2
Batteries
Digital cameras are compact devices which use complex technology. As a result,
high demands are placed on the batteries, which must also be compact. Guidelines
for the effective use of batteries:
This camera requires a voltage (energy) to store photographs in the internal
memory. It is, therefore, always better to download the photographs onto a PC
as quickly as possible and to remove the batteries from the camera when it is
not used.
Cameras with a flash use a lot of energy when the flash is used. If the camera
has a flash, limit its use and take this into consideration with regard to the life
span of the batteries.
Better quality batteries are often more effective in the long run and work for a
much longer period of time. An example is the Duracell Ultra battery.
TRUST 500FX POWERC@M FLASH
Chapter
(4.1)
(6.2)
!
(7.2)
(7.3)
(9.1)
Chapter
(4)
(6.2.1)
(6.2.2)
(6.2.3)
(6.2.4)
1
U K

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PowerCam Flash 500FX and is the answer not in the manual?

Questions and answers

Summary of Contents for Trust PowerCam Flash 500FX

  • Page 1 (6.2.4) Introduction This instruction manual is for users of the TRUST 500FX POWERC@M FLASH. This camera is suitable for making a maximum of 160 recordings. The camera has a 16 MB (128 Mbit) internal flash memory, a webcam function, a video function, automatic exposure, a lens with a fixed focal length, an extra macro option and a flash function.
  • Page 2 TRUST 500FX POWERC@M FLASH • Rechargeable batteries are also useful if the camera is used a lot. Only use NiMH batteries, preferably at least 1,600 mA (the maximum power can vary per battery type and size). Never use rechargeable NiCd batteries, because the output voltage is too low for this type of camera.
  • Page 3: Inserting The Smart Media Card

    Close the battery flap again by pushing it downwards slightly and sliding it closed. The camera will turn on automatically. The TRUST 500FX POWERC@M FLASH is now ready for use. Tip: If you wish to use rechargeable batteries, only use rechargeable...
  • Page 4: Battery Status

    TRUST 500FX POWERC@M FLASH Battery status The battery condition is shown on the LCD screen as follows: The batteries are full. The battery capacity is low. When the camera is turned on, the symbol will flash three times and the camera will make a sound to indicate that the batteries should be replaced.
  • Page 5: Description Of The Camera

    TRUST 500FX POWERC@M FLASH Description of the camera Buttons Use table 2 in combination with figure 1. Item Description Function Exposure button 1. Takes a photograph. 2. Starts and stops a video recording. LCD screen Displays the life span of the battery, the...
  • Page 6: Using The Camera

    6.2.2 Setting the resolution The TRUST 500FX POWERC@M FLASH allows you to take photographs and record videos in two different resolutions. For photographs: high (1248 x 960) and low (624 x 480). For videos clips: high (624 x 480) and low (304 x 240). The default setting when the camera is turned on is the high resolution.
  • Page 7 TRUST 500FX POWERC@M FLASH depends on the size of the Smart Media Card. 160 photographs can be taken and a longer video can be recorded in the low resolution. Carry out the following to change the camera to the low resolution: Turn the camera on by pressing the mode button (I, figure 1) for a couple of seconds.
  • Page 8: Taking A Photograph

    TRUST 500FX POWERC@M FLASH 6.2.4 Taking a photograph The camera’s default setting is the photo mode. If the camera is not in the photo mode, press the mode button (C, figure 1) until a photo camera is shown in the top left-hand corner of the LCD screen (1, figure 2). The ‘H’ or ‘L’...
  • Page 9 TRUST 500FX POWERC@M FLASH Press the exposure button (A, figure 1) to activate the automatic exposure. The camera will make a slow beeping noise. The camera will start to beep more quickly just before the photograph is taken. The photograph has been taken once the camera no longer beeps and the photo counter no longer flashes.
  • Page 10: Installing The Driver

    The latest driver can be downloaded from www.trust.com/13156. Check whether a new driver is available and use this for the installation. The current version of the driver is included on the Trust Installation CD-ROM. Note: Make sure all other programs are closed during the installation.
  • Page 11: Checking After The Installation

    ‘Start – Settings – Control Panel’. Double-click on the ‘System’ icon and select the ‘Device Manager’ tab. - Imaging device – TRUST 500FX POWERC@M FLASH, WDM Video Capture - Imaging device – TRUST 500FX POWERC@M FLASH, DSC Bulk Drive - Universal Serial Bus controllers - TRUST 500FX POWERC@M FLASH, USB Camera ‘Start –...
  • Page 12: Installing The Application Software

    COOL 360 COOL 360 is an image editing program that can be used to change the photographs you have taken using the Trust 500FX POWERC@M FLASH into panoramic photographs. Follow the instructions below to install COOL 360. Start the Trust Software Installer (see figure 3).
  • Page 13 Windows 2000) NetMeeting is a program that is supplied with Windows 98 / Windows ME / Windows 2000. With this program, you can use the Trust 500FX POWERC@M FLASH as a webcam (video conferencing). Windows XP does not have NetMeeting, but has Windows Messenger instead. To install this program, refer to your Windows XP instruction manual which is included with your Windows XP CD-ROM.
  • Page 14: Using The Software

    Only photographs taken in the highest resolution can be converted to 3.3 Mpix. Make sure the camera is connected and turned on. Click on ‘Start – Programs – Trust – 500FX POWERC@M FLASH – Trust 500FX POWERC@M FLASH’. Figure 4 will appear.
  • Page 15 In the main Photo Express menu, select ‘Get Photo’ and then select ‘Digital Camera’ The TRUST 500FX POWERC@M FLASH is visible in this window. Select ‘Digital camera’ and click on ‘OK’. TRUST 500FX POWERC@M FLASH will now be seen for ‘Select data source’...
  • Page 16 Camera settings. EXIT Closes the TWAIN window. Table 5: Explanation of the TWAIN window for the TRUST 500FX POWERC@M FLASH Select the photograph (A or B) that you wish to transfer to Photo Express by clicking on it with the mouse.
  • Page 17: Ulead Video Studio

    500FX POWERC@M FLASH. A brief description of how to use the Trust 500FX POWERC@M FLASH in Ulead Photo Explorer 6.0 is given below. For a detailed description of Photo Explorer, see the program's help function. Follow the instructions below to use the 500FX POWERC@M FLASH in Photo Explorer.
  • Page 18 Start: Start a new project and give the project name, file location, video format, etc. or select an existing project that you want to alter. Capture: Start new video recordings. You can select the Trust 500FX POWERC@M FLASH and alter the video and audio settings. The video image from your connected camera will now be visible in the main window.
  • Page 19 For more information, see the extensive Help function in Ulead VideoStudio 4.0 and the instruction manual. You can easily access this via the Trust Software Installer menu on the installation CD-ROM. The Trust Software Installer starts automatically when the CD-ROM is inserted into your CD-ROM drive (see figure 3).
  • Page 20: Saving A Video Recording

    Select ‘Built-in Mail Utility’ and fill in your ‘Mail Server’ information (given to you by your ISP) and your ‘account name’. Click on 'OK' to continue. Select ‘Trust 500FX POWERC@M FLASH Video Capture’ as the ‘Video capture device’ and select the desired frames per second (fps). Click on ‘Test It?’...
  • Page 21 TRUST 500FX POWERC@M FLASH 9.5.4 Opening a video recording Click on ‘Start – Programs – Cyberlink VideoLive Mail 4.0 – VideoLive Mail’. Click on ‘Open file’ (F). Select a video file from the location where you have saved the video files.
  • Page 22: Webcam & Internet

    This contains a description of all the functions available with NetMeeting. Webcam & Internet The Trust 500FX POWERC@M FLASH can also be used as a webcam, for example, on your Internet page. A number of informative sites about webcams are given below: http://www.camarades.com...
  • Page 23: Troubleshooting

    TRUST 500FX POWERC@M FLASH Troubleshooting Method Read the solutions given below. Check for up-to-date FAQ’s, drivers and instruction manuals on the Internet (www.trust.com/13156). Problem Cause Possible solution Windows does The computer's USB Check the settings of your USB port does not work.
  • Page 24 TRUST 500FX POWERC@M FLASH Problem Cause Possible solution The camera is turned Turn the camera on. off. The batteries are Replace the batteries (see chapter empty. The camera must be Remove the USB cable and the The camera does not react, reset.
  • Page 25 TRUST 500FX POWERC@M FLASH Problem Cause Possible solution The indoor lighting is Use the software to adjust the The image is distorted and affecting the surrounding lighting to 220 V/50 Hz recording. (see chapter 9.1.4). there are waves through the Reduce the camera’s number of...
  • Page 26 TRUST 500FX POWERC@M FLASH If you still have problems after trying these solutions, please contact one of the Trust Customer Care Centers. You can find more information at the back of this instruction manual. Please have the following information available: •...

Table of Contents