Sony DSC-D700 Marketing Operating Instructions Manual page 40

3
Viewing Pictures in an Automatic Cycle
Pictures are automatically played back frame by frame.
1
3~
6
GB
40
•OFF
•CAM
•PLAY
MENU
EXCUTE
EXIT
•OFF
•CAM
•PLAY
MENU
2
EXCUTE
3~7
EXIT
7
3
Turn the power/mode dial to OFF to turn off the
power.
Note
If the camera is on but not operated for about
three minutes, power to the LCD monitor shuts
off (Standby Mode). Also, if the camera is not
operated for approximately another two minutes,
the camera shuts off completely. In Standby
Mode you can return to the playback condition by
touching any button, dial or switch on the camera.
When the camera has shut itself completely off,
you can return to the playback condition by
pressing the release button.
1
While pressing the mode lock (green), rotate the
power/mode dial to PLAY.
The access lamp lights as the camera reads the
last picture taken.
Reading is finished when the access lamp goes
out. The picture is played back.
2
Press the MENU button.
The menu is displayed on the LCD monitor.
3
Select "Auto Play" using the 4(UP)/$(DOWN)
buttons and then press EXECUTE.
PLAY MENU
Rotate
D.Zoom
Auto Play
Protect
Delete
PC Card INIT
ID Set
LCD Set
Display Set
The Auto Play menu is displayed.