Advertisement
2.2.2 Attaching plusnuts.
NOTE: Using the assembled partition as a template, check the alignment of the holes with the
holes of the van. Make new 3/8" holes as necessary.
For technical support, contact us at 1-800-565-5321
Enlarge all the holes in the van that are aligned with the holes
of the partiton using 3/8" drill bit or step drill.
TOOLS
q Cordless Drill
q 3/8" Drill Bit or Step Drill
Attach plusnuts in the 15 holes.
TOOLS
q Plusnut Tool
HARDWARE USED
17×
# 94-130
Plusnut .250
3068-DL Installation Guide | REV. D2 | Page 8
Advertisement
