Summary of Contents for Foldy 750 Series
- Page 1 SerieS 750 Foldy Trailer User Manual & Warranty Statement © Copyright 2018 Dynovation Ltd...
-
Page 2: Safety Warning
THIS WILL RESULT IN IT TIPPING OVER. THE TOW ARM MUST EXTEND AT LEAST 1 METER FROM THE TRAILER WHEN MOVING. FAILING TO DO SO WILL RESULT IN THE TRAILER TIPPING OVER. Foldy Trailer 750 Series - User Manual V1.0... -
Page 3: Product Safety
• When in the vertical folded position, the Foldy trailer’s center of gravity is raised. • As the Foldy trailer is folded into the vertical position foot print of the trailer is significantly reduced. • On a smooth, horizontal, stable floor free of debris and any external forces the Foldy trailer will stand stably in the vertical position. -
Page 4: Waiver Of Personal Hazard Claims
It is your responsibility to inform any person involved in the use of the Foldy trailer (whether through a rental agreement or not) about the importance of reading this user manual for the... - Page 5 By accepting ownership of the Foldy trailer, or benefiting from its utility, you acknowledge in consideration of the benefits received from the Foldy trailer, that you hereby assume all risks of damages or injury, including death to yourself or a 3rd party that may sustain as a result of, or any way growing out of, the improper, negligent, irresponsible or reckless, or unsanctioned use of the Foldy trailer.
-
Page 6: Table Of Contents
4. Installation Components Included 4.1 Ratchet Winch Components 4.2 Rear Tilting Wheel Components 4.3 Tools Included 5. Connecting the Foldy Trailer to your Towing Car 6. Driving with the Trailer 7. Instructions to Folding Your Trailer 7.1 Quick Folding without Side Wall Removal 7.2 Folding with Side Wall Removal... -
Page 7: User Manual
USER MANUAL INTRODUCTION Congratulations and thank you for becoming a proud owner of the Foldy trailer. The Foldy is a premium quality trailer has been manufactured to ISO 9001 standards and certified according to the EU framework directive 2007/46/EC for the manufacture and approval of motor vehicles and their trailers. -
Page 8: Surface Treatment Disclaimer
2.6 Connecting Device (Hitch Joint Socket) The tow arm of the Foldy must be attached to a motor vehicle via an approved tow bar or hitch. Please ensure the trailer’s tow arm joint socket always has lubricating grease inside the socket. -
Page 9: Identification
The trailer is produced by EBECO, s. r. o. The production label with VIN number is placed on the right side of the front frame. VIN number is stamped on trailer frame. The VIN will also be recorded on your CoC document. Foldy Trailer 750 Series - User Manual V1.0... -
Page 10: Installation Components Included
Your Foldy trailer should include the following assembly components to ready it for use. These components can be found in a box included with your Foldy trailer when delivered. For instructions on how to use these components please reference to the assembly instructions provided with your Foldy trailer. -
Page 11: Connecting The Foldy Trailer To Your Towing Car
If the trailer’s cargo bay is loaded, the load weight should assist in lowering the tow arm socket onto the ball-joint. Foldy Trailer 750 Series - User Manual V1.0... - Page 12 STEP 2 – CONNECT THE ELECTRICAL PLUG Connect the 13-pole electrical plug to its corresponding receiving socket on your car. Turn the plug connector clockwise about 45 degrees to ensure it is locked. Foldy Trailer 750 Series - User Manual V1.0...
- Page 13 STEP 3 – RAISE THE NOSE WHEEL Loosen the ring nut holding the nose wheel in place. Rotate the nose wheel arm away from the car so that it is parallel to the trailer tow arm. Foldy Trailer 750 Series - User Manual V1.0...
- Page 14 Check to ensure no wheel bolts have come loose or gone missing. Fasten any loose wheel bolts (to 90Nm of torque) and replace any missing wheel bolts before driving with your trailer. Foldy Trailer 750 Series - User Manual V1.0...
- Page 15 Check the tyre pressures. The optimum tyre pressure for the tyres supplied with the Foldy trailer is 4.25 bar (425kpa) or 62 psi 4.25 Bar / 62 psi STEP 6 – CHECK THE TAIL LIGHTS Check that the rear tail lights are working properly.
-
Page 16: Driving With The Trailer
7. INSTRUCTIONS TO FOLDING YOUR TRAILER There are two methods for folding your Foldy trailer to store it in a safe manner: 1. Quick folding without side wall removal 2. - Page 17 Once the nose wheel is extended, reinsert the ring bolt and fasten the nose wheel arm. Then lower the tow arm to let the Foldy trailer rest on the tow arm. Foldy Trailer 750 Series - User Manual V1.0...
- Page 18 Reinsert the security bolt back through the holes on the cargo bay bracket and thread the ring nut partially (3 turns) to hold the bolt in place. Foldy Trailer 750 Series - User Manual V1.0...
- Page 19 Turn the ratchet crank handle clockwise to raise the trailer off its wheels. Stop rotating the crank handle when the trailer has been raised approximately 45 degrees off the floor. Foldy Trailer 750 Series - User Manual V1.0...
- Page 20 DEATH SHOULD IT FALL ON YOU OR SOMEONE ELSE! THE TOW ARM MUST EXTEND AT LEAST 1 METER FROM THE TRAILER WHEN MOVING. FAILING TO DO SO WILL RESULT IN THE TRAILER TIPPING OVER. Foldy Trailer 750 Series - User Manual V1.0...
- Page 21 60cm STEP 5 – FOLD THE TRAILER TO THE NEAR VERTICAL Continue to turn the crank handle raising the trailer up to the near vertical position. Foldy Trailer 750 Series - User Manual V1.0...
- Page 22 Stop rotating the crank handle when the trailer approaches the near vertical position. STEP 6 – FINALIZE THE FOLDY TRAILERS’ RESTING POSITION Finalize the trailers position by pushing it up against the wall. Turn the ratchet crank handle until the tow arm is in the fully closed position.
-
Page 23: Folding With Side Wall Removal
• This procedure is ideal when the your Foldy trailer is not used too often or you have limited garage space. Foldy Trailer 750 Series - User Manual V1.0... - Page 24 Let the front and rear sidewalls hang on by their hinges. Remove the front and rear sidewalls by pulling the safety bolts out from the sidewall hinges. Foldy Trailer 750 Series - User Manual V1.0...
- Page 25 The front and rear sidewalls should both lie neatly within the left and right sidewalls. Align the hooks of the front and rear sidewalls with the hinges at the front of the trailer. Foldy Trailer 750 Series - User Manual V1.0...
- Page 26 This will ensure that sidewalls lie flat on the trailer’s cargo deck. ATTENTION FAILURE TO FASTEN THESE SAFETY BOLTS WILL RESULT IN THE SIDEWALLS FALLING DOWN WHEN THE TRAILER IS LIFTED VERTICALLY. Foldy Trailer 750 Series - User Manual V1.0...
- Page 27 STEP 3 – REMOVE THE TOW-ARM SAFETY BOLT Remove the tow arm security bolt by loosening the ring nut and pulling the bolt out. You may let the securing bolt dangle temporarily by its chain. Foldy Trailer 750 Series - User Manual V1.0...
- Page 28 STEP 4 – FOLD THE TRAILER HALF WAY Turn the ratchet crank handle clockwise to raise the trailer off its wheels. Stop rotating the crank handle when the trailer has been raised approximately 45 degrees off the floor. Foldy Trailer 750 Series - User Manual V1.0...
- Page 29 DEATH SHOULD IT FALL ON YOU OR SOMEONE ELSE! THE TOW ARM MUST EXTEND AT LEAST 1 METER FROM THE TRAILER WHEN MOVING. FAILING TO DO SO WILL RESULT IN THE TRAILER TIPPING OVER. Foldy Trailer 750 Series - User Manual V1.0...
- Page 30 30cm STEP 6 – FOLD THE TRAILER TO THE NEAR VERTICAL Continue to turn the crank handle raising the trailer up to the near vertical position. Foldy Trailer 750 Series - User Manual V1.0...
- Page 31 STEP 7 – FINALIZE THE FOLDY’S RESTING POSITION Finalize the trailers position by pushing it up against the wall. Turn the ratchet crank handle until the tow arm is in the fully closed position. Foldy Trailer 750 Series - User Manual V1.0...
-
Page 32: Instructions For Un-Folding Your Trailer
8. INSTRUCTIONS FOR UN-FOLDING YOUR TRAILER The following steps explain how to safely unfold your trailer and ready it for use. This procedure applies both to unfolding the trailer with or without the sidewalls folded. Foldy Trailer 750 Series - User Manual V1.0... - Page 33 Place one hand back on the trailer to the side of folding tow arm to hold trailer stable. With the other hand rotate the crank handle counter clockwise four times to release the tension on the undercarriage. Foldy Trailer 750 Series - User Manual V1.0...
- Page 34 Because the trailer is in the near vertical position, you might need to assist pulling out the tow arm to about 1m from the trailer before the weight of the trailer will maintain tension on the undercarriage cable. Foldy Trailer 750 Series - User Manual V1.0...
- Page 35 The extra cable slack will allow for the cargo bay to align with the tow arm. Now locate the security bolt for the tow arm. Open the security bolt by unfastening the ring nut and pulling the bolt out. Foldy Trailer 750 Series - User Manual V1.0...
- Page 36 You might have to lift the cargo bay slightly to allow the bolt to pass all the way through. The trailer is designed so that the weight of the cargo bay rests on the bolt. Foldy Trailer 750 Series - User Manual V1.0...
- Page 37 Do not overtighten the ring nut with levered tools. STEP 4 – ADJUSTING THE NOSE WHEEL With one hand, lift the tow arm of the Foldy trailer so that the nose wheel is off the floor. The trailer is well balanced and can be easily lifted.
- Page 38 Do not overtighten the ring nut with levered tools. Your Foldy trailer is now ready to be used. Please follow the instructions in Section 5 - Connecting the Foldy Trailer to your Towing Car. Foldy Trailer 750 Series - User Manual V1.0...
- Page 39 Now mount the rear sidewall (tailgate) by inserting the safety bolts into the hinges from below. Ensure the safety clips are closed to secure the hinges from coming loose. Foldy Trailer 750 Series - User Manual V1.0...
- Page 40 Each latch has a locking clip that should be properly closed to prevent spontaneous opening of the latches during transport. Repeat the previous 4 sub-steps doing exactly the same for the front sidewall. Foldy Trailer 750 Series - User Manual V1.0...
-
Page 41: Wheel Exchange
9. WHEEL EXCHANGE One of the many advantages of your Foldy trailer is that it is easy to raise the wheel to exchange the wheel. The following steps guide how to safely exchange a wheel. 1. Prevent the trailer from moving by placing blocks on either side of the wheel that needs to be exchanged. -
Page 42: Warranty Statement
Portsmouth, GU15 2BT, UK and manufactured by EBECO, s.r.o., Zavodna 958, 027 43 Nizna, Slovakia. Your Foldy trailer comes with a 24-month warranty from the date of purchase directly from Dynovation LTD or another authorized reseller. The warrantee may apply for potential claims during the 24-month warranty period at either Dynovation LTD or directly from the manufacturer, Ebeco s.r.o. - Page 43 SPACE FOR NOTES Foldy Trailer 750 Series - User Manual V1.0...
- Page 44 PRODUCT CODE MN-FYS750-V1 SerieS 750 Foldy Trailer © Copyright 2018 Dynovation Ltd...