Advertisement
Set Up the Work Area
1.
Place a clean sheet of non-stick material (Teflon, freezer paper or wax paper) on your work area for easy clean up and to put your parts on as they
dry.
2.
Add a layer of paper towels where your model(s) will be placed to wick excess salt water away from your model
Tip: Have a sheet of the non-stick material on a tray so parts can be safely moved while they dry.
For spraying, you will need a spray bottle (supplied with your starter kit or your upgrade kit).
For dipping, you will need a sturdy, clean, watertight container (example: plastic, glass) and a graduated container or some other means of
measuring volume of water and salt.
Spraying Method
Prepare the Salt Solution
Prepare the Salt Solution
1.
Remove the spray head from the spray bottle.
Advertisement
