Fahrenheit Or Celsius Selector; Clearing Bluetooth Connections; Powering On - iDevices iGrill Pro User Manual

iDevices, LLC
3.3

Fahrenheit or Celsius Selector

Switch between Fahrenheit and Celsius readings using the switch on the
back of the iGrill.
NOTE: Switching between Fahrenheit and Celsius readings can also be
done in the iGrill Pro App.
3.4

Clearing Bluetooth Connections

Since every iGrill has been extensively tested in our factory prior to
distribution it is imperative to delete any memorized connections stored in
the iGrill. To do so, follow these steps precisely:
•
•
•
•
The long beep will indicate that your iGrill has powered up and has been
cleared of any previous pairings. These steps are only necessary the first
time you pair an Android device with your iGrill, when you change
batteries, or when connecting to a different Android device.
NOTE: The iGrill can only pair with one Android device at a time!
3.5

Powering On

•
•
Press and hold the plus (+) and minus (–) buttons.
Then press the power button.
Hold all three buttons down until you hear a long steady beep.
Release the buttons.
Turn the iGrill on by pressing and holding the power button for 4
seconds.
You will hear a beep and see the blue Bluetooth light flashing.
o This indicates your iGrill is not yet connected to your
Android device.
iGrill Pro for Android - User Manual
5