Intex CLW090 Owner's Manual
  1. Manuals
  2. Brands
  3. Intex Manuals
  4. Waterfall
  5. CLW090
  6. Owner's manual

Intex CLW090 Owner's Manual

Multi-colo led waterfall cascade
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

INTEX
MULTI-COLOR LED WATERFALL CASCADE
READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT
• Assembly and disassembly by adults only.
• This is not a toy. Do not allow children to play with this product.
• Never grab, pull, push, lean on or obstruct the waterfall at any time.
• Ensure all the clamp screws, adaptor and hose are securely attached.
• This product is intended to be used only for the purposes described in the
manual.
FOLLOW THESE RULES AND ALL INSTRUCTIONS TO AVOID PROPERTY
DAMAGE OR OTHER INJURY.

General

•
No tools are required for the assembly.
•
Fits all round and rectangular Metal Frame, Prism and Ultra Frame pools (not
suitable for Easy Set, Oval and Panel pools).
•
Built-in hydroelectric generator powers the LED light, no batteries or electrical
connection required.
•
Lights in 3 colors: green, blue and red. Preset 5 seconds between colors
change. Best seen at night or under low light condition.
•
Pump flow rate required: 4,542 - 12,113 L/h (1,200 - 3,200 g/h). System flow
rate required: 3,596 - 9,274 L/h (950 - 2,450 g/h).
•
Make sure the pump and the pool are setup, and the pool is filled with water
just below the water return inlet connection.
•
Remove the waterfall before placing a pool cover over the pool.
•
Store the product indoors when not in use.
•
For pool and filter pump problems refer to their respective owner's manual.
SAVE THESE INSTRUCTIONS
®
OWNER'S MANUAL
Model CLW090
WARNING
©2017 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd. - Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten.
Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas
registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/Intex
Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box
1440, Long Beach, CA 90801 • Distributed in the European Union by/Distribué dans l'Union Européenne par/Distribuido en la unión Europea por/
Vertrieb in der Europäischen Union durch/Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands
www.intexcorp.com
Page 1
(335IO) LED WATERFALL ENGLISH SIZE: 4.875" X 7.25" 08/08/2017
335
English
IO
335-*IO-R0-1808

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CLW090 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Intex CLW090

Summary of Contents for Intex CLW090

  • Page 1 Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 •...
  • Page 2 Adaptor B 11070 Connecting hose 11535 Due to a policy of continuous product improvement, Intex reserves the right to change specifications and appearance, which may result in updates to the instruction manual without notice. Setup 1. Locate the pool water return inlet connection or plunger valve.
  • Page 3 (335IO) LED WATERFALL ENGLISH SIZE: 4.875” X 7.25” 08/08/2017 English FIG (1) FIG (2) FIG (3) 4. For pools with plunger valve and 38mm (1.5 in) hose: a. Close the water outlet plunger valve. b. Make sure the pump is off and disconnect the pump return hose from the pool inlet plunger valve.
  • Page 4 (335IO) LED WATERFALL ENGLISH SIZE: 4.875” X 7.25” 08/08/2017 English 5. For pools with 32mm (1.25 in) hose connections: a. From the inside of the pool, insert the strainer hole plug into the water outlet fitting. b. Make sure the pump is off and disconnect the pump return hose from the pool inlet fitting.
  • Page 5 • Use a garden hose to wash the waterfall opening, check to see if any sand or deposits inside the waterfall set. • Contact Intex Service Center. Poor water • Use a damp cloth to wipe away any dirt on the waterfall cascade opening.
  • Page 6 Other than this warranty, and other legal rights in your country, no further warranties are implied. To the extent possibly in your country, in no event shall Intex be liable to you or any third party for direct or consequential damages arising out of the use of your Waterfall, or Intex or its agents’...

Table of Contents