Bratz Rock Star Quick Start Manual

FCC Compliance

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
The Transmitter carrier frequency is 98.5 MHz and the field strength is 166 µV/m at the measurement
distance of 3m.
This radiocommunication device complies with all the requirements of Industrial Canada Standard
IC RSS-210.
'Let's care for the environment!'
The wheelie bin symbol indicates that the product must not be disposed of with other household
waste. Please use designated collection points or recycling facilities when disposing of the item.
Do not treat old batteries as household waste. Take them to a designated recycling facility.
Please keep this manual as it contains important information.
www.bratz.com
TM & © MGA Entertainment, Inc.
BRATZ™, BRATZ PETZ™, LIL' BRATZ™,
BRATZ BABYZ™, BRATZ KIDZ™ and all
related logos, names, characters,
distinctive likenesses and slogans,
as well as the packaging and images
appearing thereon, are the
1007-0-E
exclusive property of MGA.
16300 Roscoe Blvd.
Van Nuys, CA 91406 USA
(800) 222-4685
Printed in China.
4
FCC STATEMENT
The preferred method of contact for
Customer Service is through our e-mail
contact form at www.mgae.com
Item no. 365488S8, 365488S8C

INTRODUCTION

Look and sound like a rock star with this awesome headset microphone! Just attach your MP3 player
to the transmit module and hook it to your belt. Both your MP3 player's music and your voice will
come out through the radio together! Sing along with your fav MP3's and belt it out like the pros!
• 1 Bratz™ Plugged-In Headset Boom Mic
• 1 Audio Cable
• 2 x AAA Heavy Duty Batteries
• 1 Microphone Transmit Module with the following parts:
a) MP3 Player Holder
b) On/Off Switch
c) Microphone Volume Dial
d) Audio In Volume Dial
e) MP3/Audio Input Jack
f) Headset Input Jack
g) Antenna
h) Belt Clip
NOTE: MP3 Player and FM radio
not included.
Audio Cable
(f) Headset Input Jack
(d) Audio in
Volume
Dial
(c) Microphone
Volume
Dial
(g) Antenna
(h) Belt Clip
Transmit Module
Illustration may vary from actual contents.
ADULT BATTERY INSTALLATION REQUIRED.

CONTENTS

Headset Boom Mic
Front
(a) MP3 Player Holder
MP3
-
+
(b) On/Off Switch
MIC
-
+
ON
(e) MP3/Audio
Input Jack
Top
AGES 6+
OFF
1