Summary of Contents for INIM Electronics Aria
- Page 1 Installation and programming manual EN 50131-1 EN 50131-5-3 EN 50131-3 EN 50130-4 EN 50130-5 Aria Wireless keypad Installation and programming manual...
-
Page 2: Table Of Contents
Order codes ........10 Copyright The information contained in this document is the sole property of INIM Electronics s.r.l. No part may be copied without written authorization from INIM Electronics s.r.l. All rights reserved. -
Page 3: Chapter 1 General Information
Web: www.inim.biz The persons authorized by the manufacturer to repair or replace the parts of this system, hold authorization to work on INIM Electronics brand devices only. Air2 System Description The advanced Air2 two-way wireless intrusion protection system (868MHz frequency) integrates directly with all models in INIM intrusion control panel range. -
Page 4: Chapter 2 Keypad Description
Wireless keypad Chapter 2 KEYPAD DESCRIPTION The Aria wireless keypad provides all the necessary functions for control and management of a SmartLiving installation equipped with an Air2 system, which it can interface with through the Air2-BS200 transceiver. It integrates all the functions of a hard-wired keypad and provides a graphic icon display. - Page 5 Installation and programming manual Table 3: Description of parts Display Aria - front Brightness sensor Wall bracket Ancillary power connector Battery switch Battery compartment cover Cover screws Counter support Wall bracket support Screw location Backlocking grips Mounting screw location Cable entry...
-
Page 6: Chapter 3 Installation
Aria Wireless keypad Chapter 3 INSTALLATION The Aria keypad can be mounted in two ways each of which requires a different installation procedure: • Counter mount, with no fixed installation point. When using this method, it is necessary to disable the keypad tamper-signal option on the control panel. -
Page 7: Enrolling Keypads
Installation and programming manual Enrolling keypads The SmartLiving control panel can manage up to 4 Aria keypads for each Air2- BS200 installed. However, each control panel model supports a maximum number of keypads which must be respected. During the addressing phase use free addresses only and ensure that no other keypads (Joy, Concept, NCode or Alien) are present at the address of the Aria keypads. -
Page 8: Chapter 4 Use Of Device
Aria Wireless keypad Chapter 4 USE OF DEVICE Operating statuses The Aria keypad has 3 operating statuses • Active • Stand-by • No communication ACTIVE During this status the keypad will be at maximum power consumption level due to the active status of: •... -
Page 9: Rolling-Code" Authentication
“1” and “3” simultaneously. Info/setup menu Aria has menu of its own for the access to some information on the keypad and on the wireless system, and for some programming functions. The menu, in full version, has 7 options. It can be are activated by holding the keys “1”... -
Page 10: Appendix A Order Codes
Aria Wireless keypad Appendix A ORDER CODES Please quote the following order codes when ordering items from the INIM Electronics product range: Code Product description Air2-Aria Wireless keypad with backlit graphic display Air2-BS200/10 Wireless transceiver module, 10 terminals Air2-BS200/30 Wireless transceiver module, 30 terminals... - Page 11 Installation and programming manual Notes...
- Page 12 Aria Wireless keypad ISO 9001 Quality Management certified by BSI with certificate number FM530352 via Fosso Antico snc - fraz. Centobuchi 63076 Monteprandone (AP) ITALY Tel. +39 0735 705007 _ Fax +39 0735 704912 info@inim.biz _ www.inim.biz...
Need help?
Do you have a question about the Aria and is the answer not in the manual?
Questions and answers