Download Print this page

Dispens-a-Matic U-25 Operating Instructions

Power advance dispenser for printed labels in rolls, or one up fanfold label formats

Table of Contents

Download this manual

OPERATING INSTRUCTIONS

FOR MODELS

"U-25" "U-45" & "U-60"

Power advance dispenser for printed labels

in rolls, or one up fanfold label formats.

U-25 Designed for labels up to 2 ½" width.

U-45 Designed for labels up to 4 ½" width.

U-60 Designed for labels up to 6" width.

Table of Contents

Do you have a question about the U-25 and is the answer not in the manual?

Page 1: Operating Instructions
Power advance dispenser for printed labels in rolls, or one up fanfold label formats. U-25 Designed for labels up to 2 ½” width. U-45 Designed for labels up to 4 ½” width. U-60 Designed for labels up to 6” width.
Page 2 “H” within 1/8” of the web. Diagram 2 Pull leading edge of carrier paper under rod “C” (U-25 does not have a Rod “C”) through dispensing plate assembly (Rod “D” and plate “E”) and around dispensing plate “E” down towards take-up spool “F”.
Page 3 (This is already included with the U-25) If you supply us with a sample roll of your labels we can diagnose if the sharp table will work, or what other modification can be made to dispense them.

U-45U-60