Organization
This manual is composed of the following chapters and appendices:
Chapter 1 ‐ Installation and Setup describes unpacking, inspection, hardware
jumper settings, connector definitions, installation, system setup and operation of
the VMIVME‐7807/VME‐7807RC .
Chapter 2 ‐ Standard Features describes the unit design in terms of the standard
PC memory and I/O maps, along with the standard interrupt architecture.
Chapter 3 ‐ Embedded PC/RTOS Features describes the unit features that are
beyond standard functions.
Maintenance provides information relative to the care and maintenance of the
unit.
Compliance provides applicable information regarding regulatory compliance.
Appendix A ‐ Connector Pinouts illustrates and defines the connectors included
in the unit's I/O ports.
Appendix B ‐ AMI BIOS Setup Utility describes the menus and options
associated with the AMI (system) BIOS.
Appendix C ‐ Intel Boot Agent describes the menus and options associated with
the LAN Boot BIOS.
Appendix D ‐ System Driver Software describes the steps required to load system
drivers.
Overview 11