Sony WEGA KV-36XBR800, WEGA KV-40XBR800 Operating Instructions Manual page 34

Notes on Using This Connection
To Do This ...
Watch the DVD player
Set up the TV remote control
to operate the DVD player
Activate the TV remote
control to operate the DVD
player
Control DVD functions with
the TV remote control
Label video inputs to easily
identify equipment connected
to the TV
Do This ...
TV/VIDEO
Press repeatedly to select the DVD input (VIDEO 5 in the
illustration).
If you have a non-Sony DVD player, you must program the remote control.
See "Programming the Remote Control" on pages 43-44.
Open the outside cover, as shown on page 42. Then set the A/V slide switch
to the position you programmed for the DVD player.
See "Operating a DVD Player" on page 61.
See the instructions for setting up Video Labels on pages 74-75.
✍
You cannot record the signal from any equipment connected into the Y, P
P jacks.
R
,
B
33