Sony WEGA KV-36XBR800, WEGA KV-40XBR800 Operating Instructions Manual page 42

Button Description
qg CODE SET Press to program the remote control to operate non-
Sony video equipment. For details, see "Programming
the Remote Control" on page 43.
qh POWER SAT/CABLE:
Buttons
or cable box.
TV: Press to turn on and off the TV.
qj PIC MODE
Press repeatedly to cycle through the available video
picture modes:
in the Video Menu. For details, see "Selecting Video
Options" on pages 64-65.
qk 0 - 9 Press
ENTER
3 seconds. Press
immediately.
ql TWIN VIEW
Press to turn on and off Twin View. For details, see
pages 48-50.
w; CH +/- Press to scan through channels. To scan quickly
through channels, press and hold down either
button.
wa MEMORY STICK Press to display the Memory Stick Menu. For details,
see "Using the Memory Stick Picture Viewer" on
page 53.
ws DRC PALETTE Press repeatedly to cycle through the three Custom
DRC Palette options. Also available in the Video
Menu. For details, see "Selecting Video Options" on
pages 64-65.
wd DISPLAY Press once to display the current channel number,
current time, and channel label (if set). Press again to
turn Display off.
wf GUIDE
Press to display the program guide of your satellite
program provider.
Press to turn on and off the satellite receiver
Vivid, Standard, Movie,
0 - 9 to select a channel; the channel changes after
ENTER
to change channels
Pro. Also available
CH
41