Sony FD Trinitron WEGA KV-34XBR800 Operating Instructions Manual page 32

Notes on Using This Connection
To Do This ...
Watch the satellite receiver
Watch the VCR
Set up the TV remote control
to operate the satellite
receiver or VCR
Activate the TV remote
control to operate the satellite
receiver or VCR
Control satellite receiver and
VCR functions with the TV
remote control
Label video inputs to easily
identify equipment connected
to the TV
Do This ...
Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
The VCR must be turned on and set to the satellite receiver's line input.
Press TV/VIDEO repeatedly to select the input to which the VCR is connected
(VIDEO 1 in the illustration).
If you have a non-Sony VCR or satellite receiver, you must program the
remote control. See "Programming the Remote Control" on pages 43-44.
For the satellite receiver, press
outside cover, as shown on page 42. Then set the A/V slide switch to the
position you programmed for the VCR.
See "Operating a Satellite Receiver" on page 61 and "Operating a VCR" on
page 61.
See the instructions for setting up Video Labels on page 76.
SAT/CABLE FUNCTION. For the VCR, open the
31