Do you have a question about the Saunders LPL 4500 Series and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for LPL Saunders LPL 4500 Series
Page 1
Saunders LPL 4500 Series Operating Procedure Ver 2.41 2017-09-19...
Page 2
Saunders/LPL 4500II and 4550 XL Both enlargers are made by LPL in Japan. They were sold in the USA by Saunders and are now sold by Omega. Overview: These enlargers are primarily for medium and large format because the Leitz Focomat V35 can only enlarge 35mm negatives and is probably the better 35mm enlarger.
Page 3
Place carrier with the Top label facing up, handle toward you and hinge away from you. Open the carrier, put the negative in and align it (a light table is available), and close the carrier. Rotate the Negative Carrier Holder Handle on the left side of the enlarger head to point up towards the Insert/Remove Negative Carrier position.
Page 4
Rotate the Negative Carrier Holder Handle on the left side of the enlarger head to point up towards the Insert/Remove Negative Carrier position. Remove the negative carrier, remove your negative, and gently slide the negative carrier back into the enlarger. Rotate the Negative Carrier Holder Handle to point horizontally towards the Focus/Print &...
Need help?
Do you have a question about the Saunders LPL 4500 Series and is the answer not in the manual?
Questions and answers