Robertshaw 570B Product Specification

Avoid Catastrophic Failure
Protect your rotating
machinery, including pumps, motors, fans,
blowers, gear boxes, compressors, turbines
and other machinery from excessive vibration.
Vibration monitoring will alert you of
increasing machine
preventative maintenance can be scheduled
before catastrophic failures occur.

General Description

Robertshaw's model 570B is a loop powered
(12 – 36 VDC) vibration transmitter that
provides a 4-20 mADC output proportionate
to vibration. The transmitter is available with
a variety of acceleration and velocity ranges.
This rugged (316L Stainless Steel, NEMA 4X,
IP68) compact unit provides continuous
monitoring of machine vibration for trending,
alarm and/or shutdown when used with a
PLC, computer, DCS, data logger or current
relays.
Installation is simple and no calibration is
required. A 1/4-28 tapped hole and a 1/4-28
stud is provided for mounting. The unit has a
2 pin connector and mates with a standard
MIL-C-5015 2 socket connector with splash-
proof boot for a weatherproof, splash-proof
connection. Optional cable assemblies are
available in lengths of 16, 32, 64 and 112 feet.
or reciprocating
vibration levels so
Sales Manual Section 140
Product Specification Model 570B
Loop Powered Stud Mount
Vibration Transmitter
Cable Sold Separately
Features and Benefits:
• Two wire loop powered (12 – 36 VDC)
• 4 – 20 mADC output (isolated)
• Compact design, 1.12" diameter, 2.80"
height
• Corrosion resistant (316L Stainless
Steel)
• NEMA 4X, IP68, hermetically sealed
enclosure
• ESD and EMI protection
• Overload protection
• Reverse wiring protection
• Available for either acceleration or
velocity measurement
•
CE Certified
•
No Trim Pots required
1