Using The Remote Control And Basic Functions - Sony TRINITRON KV-27FV16 Service Manual

Using the Remote Control and
Basic Functions
This section shows you how to use the more advanced buttons on the
remote control and how to use the on-screen menus.
Using the Remote Control
Button
POWER
FUNCTION
MUTING
SYSTEM
OFF
TV/VIDEO
ANT
/
TV/VTR
PICTURE
MODE


The remote control shown (RM-Y171) is for KV-27FV16. Your remote control
may not look like the one illustrated.
14
Description
Press when you want to turn
connected equipment on and off.
Press when you want to control
connected equipment with your
remote control.
Instantly turns off the sound.
Press again or press to restore
sound.
Powers off all Sony equipment at
once, (may not work with older
equipment).
Cycles through available video
inputs.
Press to change the VHF/UHF
input to the AUX input
(KV-27FS16, KV-27FV16,
KV-32FS16 only).
Press when you are finished
using a VCR and you want to
switch to the TV input. Your
VCR power will remain on.
Moves the cursor in the on-
screen menus. Press the arrow
buttons to move the cursor. Press
the center button to select or
access an option.
Cycles through the available
Video Mode settings.

Using the Remote Control and Basic Functions

SLEEP
MTS/SAP
DISPLAY
JUMP
GUIDE
MENU
RESET
CODE SET


For information on Picture in Picture (PIP) operation buttons, see page 17.


If you lost your remote control, see page 40.
Turns the TV off automatically in
approximately 15, 30, 45, 60, 90,
or 120 minutes. Cancel by
pressing until SLEEP OFF
appears.
Cycles through the
Multi-channel TV Sound (MTS)
options: Stereo, Mono, and
Auto-SAP (Second Audio
Programming).
Press once to show current time,
(if set) and channel number.
Cycles through available Steady
Sound settings, (see page 23).
Alternates between the last two
channels selected with the
buttons.
0 9
Brings up the custom guide of
your satellite receiver.
Displays the on-screen menu.
Press again to exit the menu at
any time.
Press to return to factory settings
while in an on-screen menu.
Use to program your remote
control to operate connected
video equipment, (see page 36).
15