• Use Clairvoyance as USB Disk. Table of Contents • Use Clairvoyance as SD memory card. 1. Introduction • Use Clairvoyance as PC Cam. • “Clairvoyance” Features 6. Maintenance • System Requirements. 7. Specifications 2. Getting to know your “ Clairvoyance”...
• Fluorescent lighting settings for - 50/60Hz 220V. 1. Introduction • 22x16mm status LCD display with Icons. Congratulations on purchasing the • Fixed focus 15m to infinity. Clairvoyance binoculars. That requires no Film • 5Pins Mini USB connector for high speed photo and your can take far pictures or short.
pressing Shutter/confirm button each time to Auto Video impression mode, the frame rate is about 9 fps for all resolution. enter the next mode sequentially 4. Battery status detection: LCD display: A 3-segments battery icon is displayed to inform users the condition of battery. 5.
Important : Do not connect the “Clairvoyance” to Connecting the Clairvoyance to the computer your computer before installing the software from the CD-ROM attached. USB port Installation the “Clairvoyance” software to your 1. Connect the USB cable(B type) to your computer’s USB port as below drawing.
5. If the SD card is protected, the PrT will be shown. 4. Focusing the Binoculars: Please un-protect the SD card then star to capture. 1. Keep only your left eye open and look through the left Battery Status indicator: lens.
Taking still pictures: Taking a video (Only works by SD Memory card ) 1. Press the Mode button to choose the video mode. 1. Press the Mode button to choose your camera mode. 2. Press and hold the shutter button to capture video The default mode is single shot mode which the most and release the Shutter button only when you wish to commonly used mode...
Using “Clairvoyance” as USB Disk: Digital camera truss up and have and let you obtain more happy application software" Clairvoyance " from your picture When your “Clairvoyance” comes with 12MB of memory at computer at the same time, Can be regarded as the built-in for keeping any files you may have.
6. Click O.K. If need to do monitor driver, please do it to change the new setting. This device complies with Part 15 of the FCC Rules. Restart your computer. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This 9.