Download Print this page

RDL D-TPSL1A Quick Start Manual

Twisted pair format-a active single-pair sender mini-jack & stereo rca in

Advertisement

Quick Links

TWISTED PAIR FORMAT-A
DB-TPSL1A
DS-TPSL1A
Models D-TPSL1A, DS-TPSL1A, DB-TPSL1A
Active Single-Pair Sender
Mini-Jack & Stereo RCA In
Stereo Audio Input Combined to Mono Output
Input on Dual RCA Jacks or Mini-Jack
Switch Selects which RJ45 Pair (A, B or C) is Fed
Remote Powering through Twisted Pair Cable
Signal and Power Pair Pass-Through between TP CABLE RJ45 Jacks
The D SERIES-TPSL1A modules are single pair audio sending modules compatible with RDL Format-A twisted pair products. These
modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources.
APPLICATION:
The –TPSL1A modules feature a stereo line input through a mini jack or two RCA phono jacks summed
to mono. The unbalanced inputs are designed to receive standard -10 dBV consumer level signals. These modules drive
only one cable pair, therefore they accept signals and power from other mic-level or line-level Format-A senders. Two other
single-pair senders may be chained with the -TPSL1A, or a single two-pair sender may be connected. If three single-pair
senders are connected together, each sender must feed a different pair: A, B or C. The power pair and all three audio pairs
are fed through both rear-panel RJ45 jacks.
The -TPSL1A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local
power connected to the module is also fed to all connected remote modules. The -TPSL1A may be remotely powered
through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same
twisted pair cable. Module power is indicated by a front-panel LED.
RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of
installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide
designers and installers the optimum choice in economical twisted pair products.
th
RDL
659 6
D-TPSL1A
St.
Prescott, AZ., USA 86301
Fused Local Power Feeds all Connected Modules
Local Power Input on Terminal Block
Blue LED Indicates Module is Powered
Daisy-Chain with Single-Pair or Two-Pair Format-A Senders
Studio-Quality Precision Active Balanced Circuitry
(928) 443-9391
FAX (928) 443-9392
www.rdlnet.com

Advertisement

loading

Summary of Contents for RDL D-TPSL1A

  • Page 1 The -TPSL1A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.
  • Page 2 FORMAT-A TWISTED PAIR Installation/Operation Models D-TPSL1A, DB-TPSL1A, DS-TPSL1A EN55103-1 E1-E5; EN55103-2 E1-E4 Typical Performance reflects product Format-A Single-Pair Senders publication time exclusive of EMC data, if any, supplied with product. Specifications are subject to change without notice. STEP 1: Set the pair selection switch to pair A, B or C to select the pair that will be driven. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C.

This manual is also suitable for:

Db-tpsl1aDs-tpsl1a