Table of Contents
Advertisement
Quick Links
XLA BROODERS
TECHNICAL INSTRUCTIONS
GAS HEATING FOR POULTRY AND LIVESTOCK
1. TECHNICAL SPECIFICATIONS
2. INSTALLATION
3. LIGHTING THE BROODERS
4. SHUT-OFF
5. MAINTENANCE
6. GAS CONVERSION
7. SPARE PARTS
Manufacturer :
SBM
3, cottages de la Norge
21490 CLENAY
FRANCE
GAS CERAMIC HEATING
N° 05000300/6
Service Commercial France
Tél :
03.80.76.74.70
Fax :
03.80.76.74.69
e-mail : sbm.france@sbm.fr
http://www.sbm.fr
Export Department
Tel :
(+33) 3.80.76.74.84
Fax :
(+33) 3.80.76.74.89
e-mail : sbm.com@sbm.fr
http://www.sbm-international.net
1312
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SBM 262 XLA
Summary of Contents for SBM 262 XLA
- Page 1 7. SPARE PARTS Manufacturer : Service Commercial France Export Department 1312 3, cottages de la Norge Tél : 03.80.76.74.70 Tel : (+33) 3.80.76.74.84 21490 CLENAY Fax : 03.80.76.74.69 Fax : (+33) 3.80.76.74.89 FRANCE e-mail : sbm.france@sbm.fr e-mail : sbm.com@sbm.fr http://www.sbm.fr http://www.sbm-international.net...
-
Page 2: Technical Specifications
1. TECHNICAL SPECIFICATIONS Refer to the rating plate on the filter box holder (see example opposite) X (mm) Weight (kg) 7.00 8.00 9.00 308 mm 575 mm Power supply 230V (+10% -15%) / 50Hz - 60Hz / 2 x 0.1A G31 (Propane) - Inlet pressure 60 to 180 mbar (nominal 148 mbar) certificate number 1312 AR 1201... -
Page 3: Rules And Regulations
2. INSTALLATION 2.1 RULES AND REGULATIONS The brooders must be installed in compliance with current local regulations, by a qualified installer. The brooders must be installed in sufficiently ventilated premises. The brooders are not authorised for use in domestic premises. 2.2 ASSEMBLING OF BROODER... - Page 4 0.6m MINIMUM (see table below) FLOOR Ceiling S (m) Inflammable ceiling (plastic) 0.80 (max. surface temperature : 70°C) Non inflammable ceiling (metal) 0.30 Brooder size h (m) 0.80 1.00 1.00 For recommended hanging heights H, please contact your local SBM specialist.
- Page 5 3. LIGHTING THE BROODERS 3.1 STANDARD INSTALLATION RCD 16A - 30mA 230V AC (Residual Current Device) Ground terminal Sensor cable VisioLon Elv-T Enclosure KIT MODULE ENCLOSURE 2 ZONES Main gas valve RP32 + 2 x 0.25A fuses G6A or G10A G31 (Propane) - 1.5 bar G20 (Natural gas) - 1.5 bar Valve B10F...
-
Page 6: Maintenance
5. MAINTENANCE ONCE A WEEK (or whenever a blue flame appears), CLEAN THE AIR FILTER. Take out the metal filter Blow out the metal filter with compressed air Compressed air jet Compressed air jet Compressed air jet Replace the metal filter in the filter holder... - Page 7 ONCE A YEAR (or whenever a blue flame appears), CLEAN THE BROODER. Remove the injector block. Unscrew thermocouples (completely) Unscrew (completely) the locking screws Pull the injector block Unplug igniters Clean the injector block Remove the filter box holder and ...
-
Page 8: Spare Parts
G20 (Natural gas) 148 mbar The equipment is adjusted for the type of gas and the pressure as displayed on the rating plate. For any change of the gas used, please contact your local SBM specialist. 7. SPARE PARTS REP. SPARE PARTS... - Page 9 For any spare part order, please specify : - brooder type and serial number - type of gas - operating pressure These informations are displayed on the rating plate, attached to each brooder.
- Page 10 TO BE DISPLAYED NEXT TO THE CONTROL UNIT...
-
Page 11: Automatic Control
Switch off the power supply. OPERATION IN CASE OF POWER FAILURE : A SBM AUTOMATIC SYSTEM CAN OPERATE WITHOUT ELECTRICITY BROODERS OPERATING AT MINI Adjust the heating level manually using the MINI regulator of the G6A / G10A. - Page 12 GAS CERAMIC HEATING Replace the metal filter in the filtre holder ONCE A YEAR (or whenever a blue flame appears), CLEAN THE BROODER : Remove the injector block. Clean the injector block with compressed air Unscrew thermocouples Unscrew (completely) (completely) the locking screws...
Need help?
Do you have a question about the 262 XLA and is the answer not in the manual?
Questions and answers