Page 1
Layher Uni Light Tower Instructions for Assembly and Use Mobile working platforms according to DIN EN 1004:2005-03 Working platform 0.75 x 1.8 m max. working height: indoors 9.3 m outdoors 9.3 m Load bearing capacity 2.0 kN/m on max. one working level...
Page 2
Assembly A1 Pay attention to the General Assembly and Usage Instructions on page 6. The examples shown of the tower models 3201– 3207 are designed for use indoors and outdoors. Pay attention to the parts list and ballasting table on page 5.
Page 3
Assembly Layher Uni Light Tower Insert the castors into the mobile beam Once mounted push all diagonal braces A3 Basic assembly secure against falling out by fastening the bolts guardrails outwards as far as possible. M 12 x 60 and self-securing nuts through the holes Tower Models provided.
Page 4
Assembly Layher Uni Light Tower During assembly and while working, the castors A6 Operating the castors When the brake is locked, the lever labelled STOP must be kept locked by pressing down the brake is in the down position. For movement, the castors Tighten bolt lever labelled STOP.
For the number of ballast weights see the Ballasting table. Ballasting In order to ballast the tower use Layher ballast weights , Part No. 1249.000 (10 kg each). Couplers with hand wheels permit simple, quick and secure fixing of the respective ballast required at the correct places. Only these ballast weights are to be used, liquid or granular ballast materials must not be used.
Page 6
9. Access to the working platform is only permitted on for assembly and use may only be performed under the exceed 1%. the inside (exception Tower Type 3201) using the supervision of a qualified person and by ladder rungs provided.