Advertisement
Quick Links
Self Install Instructions - ImOn HD DTA
What does this mean to you?
ImOn Communications continues to move towards an all digital
cable TV platform by removing existing analog cable TV signals.
This change will require each TV in a customer's home to either be
equipped with an ImOn set-top box or utilize a digital tuner within
the TV in order to continue to receive programming that is no
longer available in analog format.
Channels that are moved from analog to digital format will have
improved picture and sound quality giving you a better
entertainment experience. Moving channels from analog to digital
format also frees up bandwidth on ImOn's network to improve
other services including more HD channels and additional Internet
service capacity.
See the included channel lineup for the most up-to-date channel
numbers and locations.
What do I need to do?
To continue to receive the channels changing from analog to digital
format, you will need to install a DTA on each TV that does not
currently have an ImOn set top or does not utilize a digital tuner
within the TV.
Follow the simple steps in this instruction guide to install your
DTA on or after October 21, 2015 in order to continue to access
the following channels moving to digital format -
Destination America –
ESPN Classic –
Discovery Family Channel – channel 35
RFD-TV –
Oxygen –
Comedy.TV –
MAVTV –
PixL –
TCM –
Science –
HLN –
channel 27
channel 32
channel 51
channel 53
channel 54
channel 59
channel 64
channel 70
channel 85
channel 102
What's Included in this Install Kit?
HD Digital Transport Adapter (DTA)
Remote Control -
In order to operate the DTA you must use the remote
control included with this kit. Programming instructions for
the remote control are included in the kit.
Power Cord
HDMI Cable
Coax Cable
Remote Control Signal Receiver (IR Extender)
IR Extender allows you to install your DTA in an unobtrusive
location and control your DTA with a remote control.
Adhesive Mounting Squares
Use to mount DTA to your TV
MyImOn.com/Digital
298-6484
Advertisement
Summary of Contents for ImOn HD DTA
- Page 1 To continue to receive the channels changing from analog to digital format, you will need to install a DTA on each TV that does not currently have an ImOn set top or does not utilize a digital tuner Coax Cable within the TV.
- Page 2 In connection on your TV to the TV OUT connection on 1. Cable In - Connects to the coax cable from the wall that delivers the signal from ImOn. your DTA. Make sure the connection is finger tight. Slide the switch to channel 3.
- Page 3 If you don't take action, any TV you currently have connected directly to cable TV without an ImOn set top box, cable card or TV with digital tuner, will lose the sig- nal to the 11 channels changing from analog to digital on October 21st. If you have a set top box connected to your TV, you do not have to do anything.