IBRID MX6 Getting To Know

Getting to know your

The gas-monitoring screen

gives you important information about you unit's
What your MX6 is telling you and what you should do about it.

No faults

Bump Due Cal Due
,
What your MX6 is telling you and what you should do about it.
Bump test overdue
Calibration overdue
Zero failure
Bump test failure
Calibration failure
*When an instrument is docked, the iNet DS and the DS2 docking
stations will automatically perform scheduled tasks. When needed,
tasks may be completed by qualified personnel who can operate the
docking station or perform them manually.
What your iBrid
MX6 is telling you
and what you
should do about it.
When the gas-monitoring
display screen appears
without any service or alarm
indicators, the unit has no
faults and needs no service.
ZERO B F
, ,
tell you that your unit is in need of
The unit is requesting a bump
test (CO shown).
The unit is requesting a
calibration (CO shown).
One or more sensors has
failed a zero (H2S and LEL
shown here).
One or more sensors has
failed bump test (CO and
LEL shown here); the unit is
requesting a calibration.
One or more sensors has
failed calibration (H2S and LEL
highlighted here).
Use it.
CAL
, and service
Dock it*.
Dock it*.
Dock it*.
If the message persists,
see your supervisor.
Dock it*.
Dock it*.
If the message persists,
see your supervisor.
www.indsci.com
™
status
.
.