Page 1
NPM800 – NPM800R User’s Guide Motor multi-function relay...
Page 2
The aim of this handbook is to provide to the User information useful for the operation of NPM800 and NPM800R-NPM800RE relays with the local MMI. We advise you to read it carefully, in order to take note of the available functionalities and to proceed to connection and power of the product in accordance with the provided recommendations.
V3.00) ..............46 IST OF FAULTS OR OPERATION MESSAGES IRMWARE This document is the sole property of User’s Guide Date : 05/2013 Folio : 2 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
DEVICES NPM800 ..........................50 CONNECTIONS NPM800 ............................50 DIAGRAM NPM800 ..................50 CONNECTION OF THE CURRENT INPUTS CONNECTION OF NPM800R – NPM800RE RELAYS _________________________________ 51 NPM800R .............51 EAR VIEW OF WITH LOCATION OF THE TERMINAL BLOCKS NPM800R F ..........................52 IXING RODS NPM800RE ...........53...
♦ The value of the voltage rating of the auxiliary supply and its polarization ♦ The tightening of the: - fixing rods of the current terminal blocks (NPM800) - fixing rods of the relay case (NPM800R - NPM800RE) ♦ The good realization of connections ♦ The integrity of the connection to the earth.
Destruction of the relays will have to be carried out in accordance with legislation in force, in particular in compliance with the environment and safety requirements. This document is the sole property of User’s Guide Date : 05/2013 Folio : 5 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
2. Protection and operation functions 2.1 Protection functions NPM800 and NPM800R - NPM800RE ♦ ANSI 49 Thermal overload function, with inhibition of closing on load. ♦ Short-circuit protection, with one ANSI 50 threshold ♦ Earth fault protection, with one ANSI 51N threshold ♦...
These functions are however available with the setting software through the RS232. This document is the sole property of User’s Guide Date : 05/2013 Folio : 7 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
For the Firmware s > V3.00, see the « Maintenance » menu. This document is the sole property of User’s Guide Date : 05/2013 Folio : 8 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
Without any operation, return to default screen is carried out automatically after 5 minutes. This document is the sole property of User’s Guide Date : 05/2013 Folio : 9 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
Leaving any sub menu with the CLEAR key will lead to the above menu. This document is the sole property of User’s Guide Date : 05/2013 Folio : 10 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
In case of loss of the code, contact us to obtain an emergency password for your configuration. This document is the sole property of User’s Guide Date : 05/2013 Folio : 11 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
EARTH TRIP RELAY EARTH TRIP RELAY EARTH TRIP RELAY This document is the sole property of User’s Guide Date : 05/2013 Folio : 12 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
Parameters of the remote control option TELECONTROL This document is the sole property of User’s Guide Date : 05/2013 Folio : 13 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R Indice : g...
Leaving any sub menu with the CLEAR key will lead to the above menu. This document is the sole property of User’s Guide Date : 05/2013 Folio : 14 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
Page 16
1 to 200 s START TIME 3.00 s This document is the sole property of User’s Guide Date : 05/2013 Folio : 15 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R Indice : g...
Day / Month / Year 10:19:42 Hour / minute / second This document is the sole property of User’s Guide Date : 05/2013 Folio : 16 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
Inactive if function MAX STARTS ALLOWED NBR STARTS inactive. This document is the sole property of User’s Guide Date : 05/2013 Folio : 17 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
Hour / minute / second * for ≥V2.20 Firmware , see « Counters » menu This document is the sole property of User’s Guide Date : 05/2013 Folio : 18 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
Active or Inactive function during the start Active This document is the sole property of User’s Guide Date : 05/2013 Folio : 19 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R Indice : g...
EARTH TRIP RELAY (relays D, E, F, G if option available) This document is the sole property of User’s Guide Date : 05/2013 Folio : 20 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
....* The « Report » mode is available since V2.20 firmware. This document is the sole property of User’s Guide Date : 05/2013 Folio : 21 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
Set the thermal alarm threshold 80 to 100 % 80 % This document is the sole property of User’s Guide Date : 05/2013 Folio : 22 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
(relays D, E, F, G if option TH. ALARM RELAY available) This document is the sole property of User’s Guide Date : 05/2013 Folio : 23 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
1 to 4 MAX NBR STARTS time delay This document is the sole property of User’s Guide Date : 05/2013 Folio : 24 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R Indice : g...
START RELAY (relays D, E, F, G if option available) This document is the sole property of User’s Guide Date : 05/2013 Folio : 25 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
LOAD LOSS RELAY (relays D, E, F, G if option available) This document is the sole property of User’s Guide Date : 05/2013 Folio : 26 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
UNBAL.TRIP RELAY (relays D, E, F, G if option available) This document is the sole property of User’s Guide Date : 05/2013 Folio : 27 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
Set time delay of load-shedding 0.06 to 120 s 0.10 s This document is the sole property of User’s Guide Date : 05/2013 Folio : 28 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
LOAD SHED RELAY (relays D, E, F, G if option available) This document is the sole property of User’s Guide Date : 05/2013 Folio : 29 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
(CB closed) 4 according option) Input 1 This document is the sole property of User’s Guide Date : 05/2013 Folio : 30 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
RECLOSE RELAY (D, E, F, G relay if option available) This document is the sole property of User’s Guide Date : 05/2013 Folio : 31 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
REL. DISTURB. (relays D, E, F, G if option available) This document is the sole property of User’s Guide Date : 05/2013 Folio : 32 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
*The “REL.HOLD.RESET” function is available since V2.20 Firmware. (For V3.00, see the « Maintenance » menu). This document is the sole property of User’s Guide Date : 05/2013 Folio : 33 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
1 to 10000 circuit breaker operations 9999 This document is the sole property of User’s Guide Date : 05/2013 Folio : 34 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R Indice : g...
SET 2 INPUT group 2 according option) This document is the sole property of User’s Guide Date : 05/2013 Folio : 35 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R Indice : g...
No input (configurable with PC software) This document is the sole property of User’s Guide Date : 05/2013 Folio : 36 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R Indice : g...
G (if option available) software) OUTPUT G This document is the sole property of User’s Guide Date : 05/2013 Folio : 37 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R Indice : g...
This menu allows change of code and is described in chapter Access Code. This document is the sole property of User’s Guide Date : 05/2013 Folio : 38 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
SERIAL NUMBER Serial number of the protection xx.xxxxxxx This document is the sole property of User’s Guide Date : 05/2013 Folio : 39 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R Indice : g...
They can be read with the local MMI, the setting software (RS232 link) and the Modbus communication network. 6.1 Events generated on 50/51N/37/46 thresholds (NPM800 and NPM800R - NPM800RE) Events are recorded as soon as a trip or alarm threshold of the current functions is reached: ♦...
Page 42
Using keys allows to display further information about the fault. This document is the sole property of User’s Guide Date : 05/2013 Folio : 41 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
Motor thermal state measured during the event 80 % This document is the sole property of User’s Guide Date : 05/2013 Folio : 42 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
25/6/95 9:35:45.011 Hour: Minute: Second. Millisecond This document is the sole property of User’s Guide Date : 05/2013 Folio : 43 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R Indice : g...
After acknowledgement, the memorized events still may be read. It is necessary to use the local sub-menu EVENTS of the MMI. This document is the sole property of User’s Guide Date : 05/2013 Folio : 44 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
* The “LOSS AUX.SUPP.” and “RET.AUX.SUPP.” events are available since V2.20 version This document is the sole property of User’s Guide Date : 05/2013 Folio : 45 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
UNLISTED EVENT LOSS AUX.SUPP RET. AUX.SUPP. This document is the sole property of User’s Guide Date : 05/2013 Folio : 46 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R Indice : g...
To cause the disappearance of the last fault or operation message, it is possible to press on CLEAR key of the keyboard. This document is the sole property of User’s Guide Date : 05/2013 Folio : 47 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
A is not used. RS485-1 RS485-2 This document is the sole property of User’s Guide Date : 05/2013 Folio : 48 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R Indice : g...
RS485-2 Side view of the current terminal block without short-circuiting devices This document is the sole property of User’s Guide Date : 05/2013 Folio : 49 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R...
♦ Phases CT 1A or 5A ♦ Earth-fault CT 1A or 5A or CT Ring. This document is the sole property of User’s Guide Date : 05/2013 Folio : 50 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
9. Connection of NPM800R – NPM800RE relays 9.1 Rear view of NPM800R with location of the terminal blocks Case R2 This document is the sole property of User’s Guide Date : 05/2013 Folio : 51 ICE. No duplication nor release to third...
9.2 NPM800R Fixing rods This document is the sole property of User’s Guide Date : 05/2013 Folio : 52 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R Indice : g authorization NPM800RE...
9.3 Rear view of NPM800RE with location of the terminal blocks Case R3 This document is the sole property of User’s Guide Date : 05/2013 Folio : 53 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
9.4 NPM800RE Fixing rods This document is the sole property of User’s Guide Date : 05/2013 Folio : 54 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R Indice : g authorization NPM800RE...
For CTs inputs, take care to follow the rotating sense of phases and the direction of the connection of each phase during the wiring. This document is the sole property of User’s Guide Date : 05/2013 Folio : 55 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
9.7 NPM800R and NPM800RE wire section Terminal Blocks Characteristics 4 mm ring type terminal. Section of wire ≤ 6 mm² Screw terminal block. Section of wire 0.2 to 2.5 mm² Screw terminal block. Section of wire 0.08 to 1.5 mm²...
CASE R3 CASE R2 SIDE VIEW This document is the sole property of User’s Guide Date : 05/2013 Folio : 57 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R Indice : g...
The jumpers of the other relays of the connection will have to be removed This document is the sole property of User’s Guide Date : 05/2013 Folio : 58 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 –...
If the Master is connected at one end of the network, it is necessary to install a resistance of adaptation, not provided by ICE, then, according to the diagram below, connect the terminal "Rterm" to the terminal "- T/R" of the end relay of the connection thanks to the jumper. The jumpers of the other relays of the connection will have to be removed.
This document is the sole property of User’s Guide Date : 05/2013 Folio : 60 ICE. No duplication nor release to third party allowed without prior Edition :30/01/2014 NPM800 – NPM800R Indice : g authorization NPM800RE...