Page 2
Pitching Instructions- Solace Bell Tent I (4 meter) Open the bag, lay out all the parts & make up the poles- You should have: 1 x canvas tent 1 x inner tents 1 x groundsheet (already fitted to tent) ...
Page 3
Position the upright pole in the centre of the dome & push up (it’s best to have support here)
Page 4
Position the “A” frame pole on the inside of the door, with the spike through the canvas eyelet & tie in position Moving to the outside, starting from the front (and working back to front, then side to side) peg out the guy lines. Make sure the centre upright pole remains vertical at all times.
Page 5
Inner tent attachment- spread the inner out at the back of the tent. Attach the top clip to the loop on the steel upright pole Attach each of the clips on the side walls of the inner...
Page 6
Go round each of the attachment points to make sure there is no undue strain, and that the inner is sitting well. 10. Your Solace is now complete and ready to enjoy. ………………………………………………………………………… For weathering, care of your product and repair options, please visit our website- www.blacksofgreenock.co.uk...
Need help?
Do you have a question about the Solace I and is the answer not in the manual?
Questions and answers