Summary of Contents for K&C Tech Universal Smart Drive
Page 1
When removing the Universal Smart Drive from the USB port, please ensure that the Red light on the Universal Smart Drive is not flashing and that the light is in fact Green. This will ensure that your data on the device is not lost. It is very important that you check Universal Smart Drive light even if the dialog box on your computer shows that the data transfer is finished.
Contents 1. Introduction 2. Features 3. Specifications 4. Precautions for Using the Universal Smart Drive 5. How to use the Universal Smart Drive? 6. Driver Installation for Windows 98/SE 7. Linux Instructions for the Universal Smart Drive 8. Warranty Disclosure 9.
Just plug the Universal Smart Drive into the USB port of your computer and the drive installs immediately on it's own. It is truly a Plug and Play device. No more hassles of downloading software. You can also cross platform your data from PC to Mac and vice versa.
3. Specifications Supported OS Windows 98/SE, Windows ME, Windows 2000, Windows XP and Mac 8.6 or higher, Linux 2.4X or higher System Requirements IBM PC/AT or compatible Desktop / Notebook / Sub-Notebook / Laptop computers / Mac (Pentium® @ 100MHz or better) with USB ports Power Supply USB Bus-powered (4.5V to 5.5V) Capacities...
4.1 When removing the Universal Smart Drive from the USB port, please ensure that the Red light on the Universal Smart Drive is not flashing and that the light is in fact Green. This will ensure that your data on the device is not lost.
The Universal Smart Drive functions as a removable disk drive on your computer. When you insert the Universal Smart Drive to the USB port of your PC or Mac, then the "removable disk" icon will appear in the "My Computer Folder". You can use the Universal Smart Drive the same way as a Floppy disk or a Hard drive on your computer.
6. Driver Installation for Windows®98/SE 6.1 Auto Setup 6.1.1 Installation 1) Please ensure that the Universal Smart Drive is disconnected from computer. 2) Execute the setup file (Setup.exe) from the installation CD (or download from http://www.universalsmartdrive.com/ 3) Select ‘ Install or update driver’ in the dialog box and press ‘ Start’ .
Page 8
If your computer does not have USB controllers, then the USB device will not work. 2) Insert the Windows 98/SE device driver CD in the computer, and plug the Universal Smart Drive into the USB port. A “USB Mass storage Device” message appears and the following dialog box “Add New Hardware...
Page 9
3) Dialog box shows how Windows searches for the USD drivers. Choose “ Search for the best driver.” and press “Next” . 4) The dialog box shows where to locate the Universal Smart Drive device drivers. Select the option “CD-ROM drive”. Press “Next” button.
Page 10
5) The dialog box shows that Windows has located the Universal Smart Drive device driver in drive ‘ D’ . Press “Next” button. 6) The dialog box shows that Windows has finished the installation of the Universal Smart Drive device driver.
4. In Red Hat Linux, you can use 'Disk Management(User Mount Tool)' in 'GNOME' for Mount management. 5. You should unmount the Universal Smart Drive before you remove the Universal Smart Drive when the LED turns from Red to Green in a few seconds.