Summary of Contents for CA Clase SatFi 4G
- Page 1 SatFi Enhanced LTE Quick Setup Guide SatFi 4G WiFi System Please note that the SatFi™ brand is a solely owned division of CA Clase (UK) Ltd. 2 Mornington Place, Waterberry Drive, Waterlooville, Hampshire PO7 7XX...
- Page 2 Before you start The SatFi 4G is configured and controlled via its built-in web interface. In order to access this, you will need a wireless device such as a PC/Mac, Tablet or Smart Phone running a modern web browser such as Chrome, Safari, Edge or Firefox.
- Page 3 1 Amp fused or circuit breaker protected circuit and if connected to a higher amperage circuit, then a 1A in-line fuse should be used to protect the SatFi 4G wiring. The SAtFi 4G has a four core power cable with a Red (+) and Black (-) wire the green and white are not used.
- Page 4 SatFi 4G user configuartion login page. The Login Page gives you the key status information about your mobile network connection. Now login to the SatFi 4G by entering the default login password which is: URL: http://192.168.65.1...
- Page 5 Once you have changed the settings, scroll to the bottom of the page and click the “SAVE” button. The SatFi 4G will apply the changes and reboot, so after 20-30 seconds just refresh the page and you will need to login again.
- Page 6 3G/4G data limit. SatFi 4G is designed to be as automatic as possible and once you have used it for a while, you will quickly become confident in its operation and there should be very few times when it is necessary to login to the web interface.
Need help?
Do you have a question about the SatFi 4G and is the answer not in the manual?
Questions and answers