Subscribe to Our Youtube Channel
Summary of Contents for EyeDirect Mark II
- Page 1 Mark II Assembly Manual Ver1.6 If you have questions that are not addressed in this manual, please email steve@eyedirect.tv EyeDirect and EyeLiner are registered trademarks. USPat 6,044,226...
- Page 2 Introduction Thank you for purchasing an EyeDirect® Focusing Device. The EyeDirect is extremely easy to use and as Philip Bloom, DP, Director/Filmmaker says, will become an "essential piece of kit for direct-to-camera interviews". Visit eyedirect.tv on the web for videos of the amazing results...
- Page 3 Two pairs of 3/8x16 inch fastener holes are provided to allow the EyeDirect to be moved closer to the camera or further away to accommodate longer lenses. 9) Attach the mirror box with 1/2 inch 1/4x20 tie down knobs (included).
- Page 4 18 inch base plate, the optional 2.25 inch RISER will assist in putting the camera lens at optical center of the EyeDirect. Additionally, there is left to right adjustment in the RISER to center DSLRs that have camera tie down holes that are off-optical-center.
- Page 5 Arri Alexa with 18-100 Cooke Cine Zoom on Arri sliding base plate Note the L Bracket has been moved to the furthest position on the EyeDirect adjustable base plate to accommodate the longer lens footprint. iPad® 2 Teleprompter/Autocue Accessory- (Mark II only)
- Page 6 The RUBBER DONUT is used to put over the barrel of the camera lens..and 'matte' the light that is seen by the subject between the barrel of the taking lens and the EyeDirect lens port. Just like with an Autocue/teleprompter, you want to provide a ‘black field’...
Need help?
Do you have a question about the Mark II and is the answer not in the manual?
Questions and answers