Advertisement
Quick Links
Advertisement
Summary of Contents for STREAM LABS Stream Logo SDI 2.0
- Page 1 Stream Labs, JSC. Stream Logo SDI 2.0 User Manual Nov. 2004...
-
Page 2: Logo Generator
STREAM Labs USER’S MANUAL LOGO GENERATOR Stream Logo SDI v2.0 Stream Logo SDI v2.0 is designed to work with 8 and 10 bit serial component SDI input signal and 10-bit output signal in full compliance with the CCIR656 and SMPTE259m recommendations. All service information is kept as the signal passes through the card;... - Page 3 STREAM Labs USER’S MANUAL Phillips Trimedia video processor allow to extend the Stream Logo SDI functionality by improving inner algorithms, without any hardware changes. Stream Logo SDI allows to compress files inside the system, in order to provide a more economical storage.
- Page 4 STREAM Labs USER’S MANUAL sequence, to display the sequence and the commands evocating other logos, or to run their own cycles to form continuous video sequences. The program can also be used to create a replay sequence for compositions, which can contain an arbitrary number of static or dynamic logos.
- Page 5 STREAM Labs USER’S MANUAL Stream Logo SDI v2.0. Device Control Program Description Software package: SL_SdiTM.exe + SlAlpha.dll + SL_sdi.ini 1. When the program (SL_SdiTM.exe) is launched, a dialog box appears with a list of Stream Logo SDI v2.0 devices present inside your LAN.
- Page 6 STREAM Labs USER’S MANUAL 2. If Stream Logo SDI v2.0 devices are located inside the LAN, the program main window is displayed, which contains tabs for all found devices. The window, which contains the tabs of the devices, also contains another range of tabs allowing to control the Stream Logo SDI v2.0 parameters.
- Page 7 STREAM Labs USER’S MANUAL 4. Switching to the [Decoder] tab allows to control the following device parameters (for active analog input only): • Brightness / contrast / color saturation adjustment [Brightness] / [Contrast] / [ Saturation] • Analog input commutation: [Composite] / [S-Video] / [Component].
- Page 8 STREAM Labs USER’S MANUAL Displayed logo is an active logo displayed by the device. This attribute of a logo can be used for its quick display/hiding. 5.2. To edit the parameters of a specific logo, click with the mouse at the corresponding field of the table (logo sizes cannot be edited).
- Page 9 STREAM Labs USER’S MANUAL The displayed dialog box allows to choose the dynamic logo, select the frames (up to 8), and specify the duration of stoppage (Freeze) during the replay. Note that to ensure the correct replay in (Freeze) mode, it is important that: •...
- Page 10 STREAM Labs USER’S MANUAL Stream Logo SDI v2.0...
- Page 11 STREAM Labs USER’S MANUAL Stream Logo SDI v2.0...
- Page 12 STREAM Labs USER’S MANUAL The Set Position menu: The logo position Х coordinate is adjusted with the [<] and [>] buttons; the Y ∨ coordinate, with the [∧] and [ ] buttons. The zero coordinate point is at the top left corner.
- Page 13 Questions, remarks, and suggestions are to be submitted via e-mail to support@stream-labs.com, or via the web-site at http://www.stream-labs.com. The Stream Labs Co. can also be consulted by phone at (095) 930-80-07/56 on weekdays from 10 a.m. to 6 p.m., Moscow time.
Need help?
Do you have a question about the Stream Logo SDI 2.0 and is the answer not in the manual?
Questions and answers