Menu Position Menu; Input Sensing On/Off Menu - Sony SDM-HX73 Operating Instructions Manual

x Adjust the picture's position manually
(H CENTER /V CENTER)
If the picture is not in the center of the screen, adjust the picture's
centering as follows.
1 Set the resolution to 1280 × 1024 on the computer.
2 Load the CD-ROM.
3 Start the CD-ROM, select the area and model, and
display the test pattern.
For Windows
Click [Utility] t [Windows]/[Win Utility.exe].
For Macintosh
Click [Utility] t [Mac]/[Mac Utility].
4 Press the MENU button.
The main menu appears on the screen.
5 Press the m/M buttons to select
press the OK button.
The SCREEN menu appears on the screen.
6 Press the m/M buttons to select "H CENTER" or "V
CENTER" and press the OK button.
The "H CENTER" adjustment menu or "V CENTER"
adjustment menu appears on the screen.
7 Press the m/M buttons to center the test pattern on
the screen.
8 Click [END] on the screen to turn off the test pattern.

MENU POSITION menu

You can change the menu position if it is blocking an image on
the screen.
M E N U P O S T O N
1 2 8 0 x
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
POSITION) and press the OK button.
The "MENU POSITION" menu appears on the screen.
3 Press the m/M buttons to select the desired position
and press the OK button.
You can choose one of 9 positions where the menu will
appear.
(SCREEN) and
I I
1 0 2 4 / 6 0 H z
E X I T
(MENU

INPUT SENSING ON/OFF menu

When you select AUTO ON in the INPUT SENSING ON/OFF
menu, the monitor automatically detects an input signal to an
input terminal, and changes the input automatically before the
monitor goes into the power saving mode.
I N P U T S E N S I N G
AU TO O N
AU TO O F F
1 2 8 0 x
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
SENSING ON/OFF) and press the OK button.
The INPUT SENSING menu appears on the screen.
3 Press the m/M buttons to select the desired mode
and press the OK button.
• ON: When the selected input terminal has no input
signal, or when you select an input terminal by the
INPUT button on the monitor and the terminal has
no input signal, the on-screen message appears
(page 21) and the monitor checks the input signal to
another input terminal automatically to change the
input.
When the input is changed, the selected input
terminal is displayed on the left upper of the screen.
When there is no input signal, the monitor goes into
the power saving mode automatically.
• OFF: The input is not changed automatically. Press the
INPUT button to change the input.
1 0 2 4 / 6 0 H z
E X I T
(INPUT
(continued)
17
GB