Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for JVCKENWOOD CR-M10DAB
Summary of Contents for JVCKENWOOD CR-M10DAB
- Page 1 DAB+ Compact Radio CR-M10DAB OPERATING INSTRUCTIONS JVCKENWOOD Corporation...
-
Page 2: Table Of Contents
Prior to start-up Contents Before switching on the power supply Safety information Prior to start-up Connecting Component names and functions Basic functions Switching on the system Volume controls Navigating the menu Setting the menu language Setting the time Other settings in the time menu Setting the display lighting Setting to sleep timer Using the DAB+ radio... -
Page 3: Before Switching On The Power Supply
5. Power supply - This device may only be connected to the mains supply using the plug-in power supply unit provid- ed. Use this adapter for the Compact Radio CR-M10DAB only. In any case ensure that the local mains supply corresponds to the specifications on the plug-in power supply unit. If you are not sure about the type of voltage supplied to your home, contact your dealer or the local energy supply company. - Page 4 or electrical shock can occur. Never spill liquid of any kind onto this device. 10. Maintenance - Never try to carry out maintenance on this device yourself, since when opening or removing the covers, live parts can be exposed, contact with which poses a hazard. Please entrust all maintenance work to qualified Customer Service personnel.
- Page 5 - or leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; - or a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. EU Declaration of Conformity JVCKENWOOD Corporation hereby declares that the CR-M10DAB type of radio equipment conforms with Directive 2014/53/EU. The complete text of the EU Declaration of Conformity is available under the following internet address: http://www.kenwood.com/cs/eudoc/ Manufacturer: JVCKENWOOD Corporation 3-12. Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPAN...
-
Page 6: Prior To Start-Up
Prior to start-up Unpacking Carefully unpack the device and ensure that all accessory parts are present: Operating instructions Plug-in power supply unit Insert batteries (not supplied) • Insert 4 R6 / AA / Mignon batteries into the radio, ensuring the correct polarity (+ and -). • Power supply via the batteries will be shut off if power is being supplied via the plug-in power supply unit. - Page 7 Components and functions Front Panel Rear Panel Control elements 1 - Display 2 - Line-In connection 3 - Headphone connection 4 - Plug-in power supply unit connection 5 - FM / DAB antenna Top View 1 - Switching sources 2 - Standby/ On 3 - Volume/Enter/Auto/Play/Pause 4 - Storage location+ (Preset+) 5 - Storage location- (Preset-) 6 - Station buttons (1/2/3/4) 7 - Memory button 8 - Tune- 9 - Tune+ 10 - Menu 11 - Info ...
-
Page 8: Basic Functions
Basic functions Switching on the radio: Press the button on the radio Switching off in standby: Press the button on the radio. ‘Standby’ will appear briefly on the display and the device switches over to standby mode. The time will continue to be displayed. Volume controls Rotate the “VOL”... -
Page 9: Setting The Display Lighting
Setting the display lighting The display lighting can be set in 3 brightness levels. The following settings can be performed in the “Backlight” menu: “On level”: Display brightness when the radio is switched on. Options: “High” / “Medium” / “Low” “Dim level”: Brightness setting for operation and standby. Options: “High” / “Medium” / “Low” “Timeout”: Time until the display is adjusted to the “Dim setting” lighting level. Options: “On / 10 sec / 20 sec / 30 sec / 45 sec / 60 sec / 90 sec / 120 sec / 180 sec“ ”On”... -
Page 10: Using The Dab+ Radio
Setting the alarm 2 different alarm times can be set in the CR-M10DAB. The alarm can also be programmed for the follow- ing time blocks: “Daily” / “Once” / “Weekends” / “Weekdays”. To set the alarm time, please proceed as follows: 1. Switch the radio on and, using the <SOURCE> button, select the source FM. 2. Press the <MENU> button, then, using <TUNE+/->, select the “System” menu and then press the “VOL”... -
Page 11: Selecting A Dab+ Station
Manually setting ensembles • Press the <MENU> button to bring up the DAB menu. • Press the <Tune+> button until “Manual tune” appears in the display. • The function is confirmed using the “VOL” button and the currently set channel is shown in the display with its associated frequency. •... -
Page 12: Further Dab+ Information
Further DAB+ information With DAB+, additional information is also transmitted in addition to music signals. This can be brought up as follows. Press the <INFO> button to successively call up the following information: • Signal level: This is shown by symbols appearing in the display from left to right. The more symbols are shown, the better the reception. -
Page 13: Saving Channels In The Station Memory
Using Radio Data System (RDS) RDS is a transmission system with which the FM station transmits other useful information along with the actual transmitter signal. These can be extracted from the normal transmitter signal and used for a range of additional functions. If an RDS signal is received, then, after some time, the station name will be displayed rather than the frequency and radio text will be displayed in the lower line of the display (if supported by the station). -
Page 14: Using Bluetooth
“Not connected” and “Pairing” is heard. Pairing Bluetooth devices The BLUETOOTH function allows wireless transmission of music files (audio streaming) to the system. Please use the following procedure for pairing the relevant devices (e.g. smartphones): 1. On your BLUETOOTH device open the pairing function and search for “CR-M10DAB”. 2. Select “CR-M10DAB” for pairing and wait until “Connected” appears in the display and “Device connected” is heard. Pairing is now concluded. 3. If the BLUETOOTH device requests a 4-digit PIN then please enter “0000”. 4. The BLUETOOTH device is now saved and will be automatically paired in future. 5. To connect another BLUETOOTH device, please repeats steps 1 - 3. -
Page 15: Troubleshooting
Troubleshooting In the event of malfunction please check the following points: No sound Plug in the mains plug correctly. Set the volume to the correct level. Make sure that the desired source is selected. The system does not react to button pressing ... -
Page 16: Disposal
Disposal Disposal of used electrical and electronic devices and batteries. The symbol (crossed-out wheeled bin) on the product or its packaging indicates that the product may not be treated as normal household waste but must rather be handed in at a collection point for recycling electrical and electronic devices and batteries. By playing your part in ensuring the correct disposal of this product you will be safeguarding the environment and the health of your fellow human beings. -
Page 17: Technical Data
Technical data CR-M10DAB Power supply 100 – 240 V AC 50/60 Hz DC Input 6.5 V / 0,5 A Power input in standby mode < 1 Watt FM/DAB+ tuner DAB tuning range BAND III 174.928 MHz – 239.200 MHz FM tuning range 87.50 MHz – 108.00 MHz BLUETOOTH BLUETOOTH Version V5.0 Power Class Class 2 Output power 4dbm Range approx. 10 metres (can differ depending on the... -
Page 18: Warranty
Repair or replacement do not effect an extension of the warranty period. All other claims, especially claims for cancellation of sale, reduction of the purchase price or damages, are barred. Contact address: JVCKENWOOD DEUTSCHLAND GMBH Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel Tel. +49 (0)6101-4988 0, www.kenwood.de...
Need help?
Do you have a question about the CR-M10DAB and is the answer not in the manual?
Questions and answers