Advertisement
Quick Links
COMMANDER-BT
USER MANUAL
1.0 explanation
COMMANDER-BT series has a stainless-steel pan, A variety of logos
displayed large backlit LCD. There are four easy to use function
，
，
With the corresponding power module.
.
2.0 Precautions
⚫ Please do not reduce the accuracy of the scales in place
⚫ Do not place in direct sunlight or near extreme temperature
⚫ Do not put on an unstable platform for weighing
⚫ Avoid using with an unstable power source
⚫ Do not place scale near machine vibration.
⚫ Avoid high humidity and dust as it may cause malfunction of the scale
⚫ Avoid placing the scale near air vents or windows
⚫ Keep the scale clean of debris
Note: When moving the scale, be careful to avoid bending the connecting
cable and connector.
3.0 KEY
Power on/off
Press to hold the reading, refer to 11.4 & 11.5
Press to select unit: KG, Lb, Oz
Zero or tare the weight
，
Advertisement
Related Manuals for Optima Home Scales COMMANDER-BT Series
Summary of Contents for Optima Home Scales COMMANDER-BT Series
- Page 1 1.0 explanation COMMANDER-BT series has a stainless-steel pan, A variety of logos displayed large backlit LCD. There are four easy to use function ， ， ， With the corresponding power module. COMMANDER-BT 2.0 Precautions ⚫ Please do not reduce the accuracy of the scales in place ⚫...
- Page 2 connection. d. How long before you need to replace the battery 4. Platform and display The platform can continuously work for about 100 hours if 4.1 Platform Ni-MH rechargeable alkaline battery is used. batteries are recommended. 4.2 Display of indicator The platform works with 4*AA battery.
- Page 3 8.4 select units 6.0 backlight display press to select units LCD backlight can be set to remain open until closed or automatically 8.5 print/hold function turned off (i.e., when using scales or press the start button) three If communication output mode is set “pr” (refer to 11.4), modes See details in section 11.2 how to setup press will send weight to the USB port.
-
Page 4: Selection Of Output Mode
Press to confirm Display will show “Hod 3” (DEFAULT SET). Hod 1: No hold function Backlight settings 11.2 Hod 2: Automatic hold function, it will hold for 15 seconds when the reading is stable. The second parameter is to set the backlight, display "bL 3" Hod 3: Manual hold function, press hold key will hold the reading, (default setting) press again will cancel the hold reading. - Page 5 13.0 Error There may be some error messages during the boot process is running, the following error message: phenomenon Failure Analysis Error code LCD display “bt-c” when The platform is not "bt-c" power on at the range or lack of battery overload "-----"...
Need help?
Do you have a question about the COMMANDER-BT Series and is the answer not in the manual?
Questions and answers