Page 1: Table Of Contents
Adding New User Keys Deleting Whitelist LED Status Indicators FCC and ISED Statement DO NOT REMOVE FROM STORE For additional support, please reach out to our Contact Center at 800-426-6844 www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved...
Page 2: Materials In Box
MATERIALS IN BOX SECURE PLUG™ (PATENT PENDING) USER GUIDE Secure Plug Power Strip (Region-Speciﬁc) Alarm Label Sheet Remote Access Module (Optional) www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved...
Page 3: Installation
INSTALLATION SECURE PLUG™ (PATENT PENDING) USER GUIDE WARNING: No user serviceable parts inside. Please contact MTI for service. CAUTION: To Reduce the Risk of Electric Shock – Use Only Indoors. CAUTION: Risk of Electric Shock. Do not plug into another relocatable power tap or an extension cord.
Page 4: Key Whitelist
To close the whitelist mode, place the Authorization Card over the RFID icon. Whitelist mode will end automatically after 3 minutes of no use. LED will be ﬂashing white. www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved...
Page 5: Merchandising
LED for that socket port. Unplug cable from the Power corresponding white LED for that socket port. Strip and try again making sure cables are unplugged from the product. www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved...
Page 6 Turn the power to products with a detachable power adapter to ON at this time. Keep power to other products OFF (ie. hardwired products or products without power adapters). www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved...
Page 7: Arming/Disarming The System
LED for that socket port. To re-arm, ﬁx the issue by plugging all cables back in. Place a User Key over the RFID icon and the LED will be solid white. www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved...
Page 8: Remerchandising
LED will be yellow. yellow. ﬂashing white. If successful Æ unit beeps 2 times and the LED will turn solid green If unsuccessful Æ unit beeps 4 times (retry) www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved...
Page 9: Led Status Indicators
Mains Power Loss and merchandising information will be maintained upon restoration of power. If merchandising fails, unplug the product. LED is solid red. Merchandising Unsuccessful Follow merchandising process again. www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved...
Page 10 1. Add Secure Plug unit to Mesh Connected Mesh network. LED is solid yellow. 2. Delete Whitelist Mode (If using 2. System is deleting whitelist. Wait until Authorization Card) complete. www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved...
Page 11 The system will self-heal. System has received an LED is ﬂashing multiple colors. “identify” command from a user of the MTI Connect software. www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved...
Page 12: Fcc And Ised Statement
125KHz: <42dBuA/m at 10m 2.4GHz: <20dBm MTI declares that the radio equipment models 165-00460, 165-00470 and 165-00471 Secure Plug Power distribution units including the models 165-00645 and 165-00670 Remote Access Modules in compliance with EU Directive 2014/53/EU. The full text of the EU Manufacturer’s Declaration of Conformity is available at the following internet address: www.mobiletechinc.com Merchandising Technologies Inc.

This manual is also suitable for:

Secure plug 165-00645 Secure plug 165-00670