Advertisement
Quick Links
John Lewis
King
Thank you for purchasing this Nevada Storage Bed. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.
Pre-assembly Preparation
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
HEAVY
This product is
WHEN LIFTING
This product takes approximately
The fittings pack contains
CHILDREN
.
Read this leaflet in full before commencing assembly.
If you require any additional information or have any issues with this product please call the John Lewis
Helpline on 01244 - 689949 or e-mail: mail@fwgroup-uk.com
Nevada 150cm Storage Bed
. It should be assembled as near as possible to the point of use.
to avoid personal injury and (or) damage to the product.
45 MINUTES
SMALL PARTS
2 PEOPLE
to assemble with
KEPT AWAY FROM YOUNG
which should be
1/11
Stock number: 810/84803
For product support or spare parts please
call the John Lewis Helpline;
T: 01244 689949
E: mail@fwgroup-uk.com
TAKE CARE
.
Advertisement
Related Manuals for FWG Nevada
Summary of Contents for FWG Nevada
- Page 1 Nevada 150cm Storage Bed Stock number: 810/84803 King Thank you for purchasing this Nevada Storage Bed. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. For product support or spare parts please call the John Lewis Helpline;...
- Page 2 Fittings and parts checklist Bedstead Parts Headboard x 1 Footboard x 1 Side Rails x 2 Slat Set x 1 Centre Rail x 1 Fittings Bolt x 8 Allen Key 4mm x 1 (M8 x 22 mm) Screw x 6 (30mm) 2/11...
- Page 3 Step by step assembly instructions - bedstead Step One Fix the Side Rail (3) to the Headboard (1) and Footboard (2) using Bolts (B) as shown. Tighten using Allen Key (A). B x 8 pcs PLEASE NOTE THERE ARE ARROWS ON THE SIDE RAILS INDICATING WHICH WAY UP THEY SHOULD BE Step Two...
- Page 4 Step Three Fix the Slats (4) at both ends using Screws (C). C x 6 pcs 4/11...
- Page 5 Nevada Storage Bed - drawers The maximum weight that can be held in each drawer is 15kg. 5/11...
- Page 6 Fittings and parts checklist - drawers Fittings Screw x 24 Cam x 8 (6 x 24 mm) (12mm) Screw x 12 Cam Lock x 8 (35mm) (12 x 10.5 mm) Dowel x 8 Castor x 8 (8 x 30 mm) (40 x 40 mm) Parts Drawer Fronts x 2...
- Page 7 Step by step assembly instructions Step One Attach the Castors (F) to the Drawer Left Panel (2) and Drawer Right Panel (3) using the 12mm Screws (D) and tighten using a screw driver as shown in the diagram below. D x 24 pcs F x 4 pcs Step Two Screw the Cam Bolts (A) into the Drawer Fronts (1) as detailed below.
- Page 8 Step Three Insert 8 x 30 mm Dowels (C) into the Drawer Fronts (1), then insert the Cam Locks (B). Now place the Drawer Left Side Panel (2) and Drawer Right Side Panel (3) and secure by tightening the Cam Lock with a screwdriver as shown below. WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING CAM-PILLAR.
- Page 9 Step Four Slide the Drawer Bottom (5) into the groove along the Drawer Left Panel (2), Drawer Right Panel (3) and Drawer Front (1) as detailed in the diagram below. Step Five Attach the Back (4) to the Drawer Left Panel (2) and Drawer Right Panel (3) using the 35 mm Screws (E) and screw driver.
- Page 10 Step Six The Drawer can now be placed under the bed and the bed is now ready for use. 10/11...
-
Page 11: Safety Instructions
Care and Maintenance Wood Furniture Wood displays different grain patterns depending on which way they cut - for example, the 'medullary ray' which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of the wood.
Need help?
Do you have a question about the Nevada and is the answer not in the manual?
Questions and answers