RPB NOVA 2000 Instruction Manual

Respirator
Hide thumbs Also See for NOVA 2000:

Advertisement

Quick Links

0086
NOVA 2000
®
INSTRUCTION MANUAL
EN 14594: 2005
Employers: Read this manual and the flow control device Instruction
Manual and carry out the Employer Responsibilities (page 8).
Product users: Read this manual and the flow control device
Instruction Manual and follow the Product User Safety Instructions
(page 10).
Manuals are regularly updated. Make sure this manual is available to
all users for reference.
Current version of manual and other languages:
http://www.rpbsafety.com/product/nova-2000/
Protecting you for Life's best moments
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NOVA 2000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for RPB NOVA 2000

  • Page 1 0086 NOVA 2000 ® INSTRUCTION MANUAL EN 14594: 2005 Employers: Read this manual and the flow control device Instruction Manual and carry out the Employer Responsibilities (page 8). Product users: Read this manual and the flow control device Instruction Manual and follow the Product User Safety Instructions (page 10).
  • Page 2: Table Of Contents

    DANGER Indicates a hazardous situation that, if not avoided, will result DANGER in death or serious injury. Read the Instruction Manual. Additional copies of RPB manuals can be found at www.rpbsafety.com. ® CERTIFIED BY: BSI Group (NB0086)
  • Page 3: Introduction

    RPB Safety, LLC. For technical assistance contact our Customer Service Department at 1-866-494-4599 or email: customerservice@rpbsafety.com...
  • Page 4: Important Safety Information

    ® ® components, including the Breathing Tube Assembly, Flow Control Device, and RPB ® Breathing Air Line is an EN 14594 (AS/NZS 1716) respirator with an Assigned Protection Factor of 40 (Nominal Protection Factor of 1000). As such, it significantly reduces, but does not completely eliminate, the breathing of contaminates by the respirator wearer.
  • Page 5 A flammable or explosive atmosphere is present when used with systems including electrical parts that are not intrinsically safe, such as 09-900 NOVA TALK ™ FACE AND EYES:  The NOVA 2000 respirator with Inner Lens DOES NOT meet EN 166:2001 (AS/NZS ® 1337.1:2010) requirements. ...
  • Page 6: Respiratory Component Diagram - Cautions & Limitations

    NOVA 2000 ® RESPIRATOR COMPONENT CONCEPT CAUTIONS AND LIMITATIONS 1. Respirator Not for use in atmospheres containing Helmet less than 19.5 percent oxygen. Assembly Not for use in atmospheres immediately dangerous to life or health. Do not exceed maximum use...
  • Page 7: Air Source, Fittings, And Pressure

    Grade D requirements. AIR QUALITY This respirator must be supplied with clean breathable air at all times. Breathable air must at least meet the requirements for EN 12021 and AS/NZS 1715. The RPB NOVA 2000 does not purify ®...
  • Page 8: Employer Responsibilities

    NOVA 2000 ® EMPLOYER RESPONSIBILITIES Your specific responsibilities may vary by location and industry, but in general RPB expects that ® employers will: Follow all applicable standards and regulations for your location, industry, and activity.  Depending on your location and industry, a number of standards and regulations may apply to your selection and use of respirators and other personal protective equipment.
  • Page 9 (e.g. regarding respirable silica). Refer to rpbsafety.com/importantsafetyinformation/ for links to websites that can provide regulatory guidance.  If you have any questions, contact RPB ®  Call Customer Service Department: Tel: 1-866-494-4599 Email: customerservice@rpbsafety.com...
  • Page 10: Product User Safety Instructions

    Remove any damaged component or product, including any helmet or visor that has been subject to impact, from service until repaired or replaced. Scratched or damaged safety lenses or other components should be replaced with genuine RPB brand ®...
  • Page 11 Care (page 15). See Donning (page 17) for fit information. VERIFY THAT YOU HAVE THE APPROPRIATE EQUIPMENT FOR YOUR ACTIVITY Verify that the NOVA 2000 provides appropriate protection for your activity. As applicable, check ® your workplace safety program, respiratory protection program, and standards and regulations for your activity or industry.
  • Page 12 You have any other reason to suspect that the respirator is not providing adequate protection. PRODUCT CARE Never place the helmet on hot surfaces. Do not apply paints, solvents, adhesives or self- adhesive labels except as instructed by RPB . This product may be adversely affected by certain ®...
  • Page 13: Breathing Air Pressure Table

    BREATHING AIR PRESSURE TABLE S - SPECIAL OR CRITICAL USERS INSTRUCTIONS - SAR TABLE 1.1 This table lists Air pressure ranges needed to provide the RPB NOVA 2000 with the volume ® ® of air that falls within the required range of 160 - 425lpm (7 - 15cfm) according to government regulations.
  • Page 14: Respirator Setup And Care

    NOVA 2000 ® RESPIRATOR SETUP AND CARE FIGURE 2.1 FIGURE 2.2 Connect the RPB Safety NOVA 2000 When attaching the breathing tube to ® ® Air Supply Hose to a breathing air source the helmet, attach the fixed end of the...
  • Page 15 LENSES FIGURE 3.1 FIGURE 3.2 Make sure you have an RPB inner lens Fit an outer lens onto the tabs on the visor, ® securely fitted into the window frame fold the visor onto the helmet and secure it gasket.
  • Page 16: Donning And Doffing

    Not doing these steps could expose you to hazardous materials and contaminants that could impair the function of the respirator. DONNING YOUR HELMET Once you have completed the set up, you are ready to fit your RPB NOVA 2000 . First, ®...
  • Page 17 FIGURE 4.4 FIGURE 4.3 Regular Capes: Pull the respirator cape Blast Jackets (NV2002HB Series): Put your around your body and fasten the snap arms through the arm holes then pull the jacket down around your waist. hooks on each side of the cape. DOFFING YOUR HELMET FIGURE 4.5 When you have finished working leave the...
  • Page 18: Inspection And Cleaning

    LENSES AND LENS GASKETS Check Inner Lens Gasket (NV2003) for splits, cracks or wear and tear. Replace any damaged or worn parts immediately with RPB genuine parts. The Inner Gasket can be washed with ®...
  • Page 19: Parts And Accessories

    RPB logo and part number), and only in the specified configuration. Using incomplete ® or inappropriate equipment, including the use of counterfeit or non-RPB parts, can result ® in inadequate protection and will void the EN 14594 (AS/NZS 1716) approval of the entire...
  • Page 20 NOVA 2000 ® PARTS AND ACCESSORIES CONTINUED VISOR AND LENSES FIGURE 6.2 NV2018 NV2031 NV2004 NV2008 NV2003 NV2017 NV2003 Window Frame Gasket NV2018 Inner Lens Packet 10 NV2004 Visor with Hinge and Screws NV2031 Outer Lens Packet 50 NV2017 Tearoff Lens Packet 50 NV2008 Latch PADDING SYSTEM FIGURE 6.3...
  • Page 21 RESPIRATOR CAPES FIGURE 6.4 NV2012 NV2013 NV2002 NV2002 28¨ Nylon Cape NV2012 Inner Bib NV2013 Cape Cover Band BREATHING TUBE & FLOW CONTROL DEVICES FIGURE 6.5 4000-01 02-804 02-810 02-807 02-806 02-805 02-816 02-811 02-809 03-102 NV2030 02-812 NV2021 02-813 NV2022 03-101 NV2030...
  • Page 22 NOVA 2000 ® PARTS AND ACCESSORIES CONTINUED BREATHING AIR LINES Figure 6.6 NV2029 NV2025 NV2027 NV2028 15ft 25ft Item No. Description Part No. 30m Breathing Air Line NV2027 7.5m Breathing Air Line NV2028 15m Breathing Air Line NV2029 Quick Release Coupler NV2025 4.5m Recoil Hose...
  • Page 23: Warranty And Liability Statement

    Safety is not liable for damage, loss or expense resulting from the failure to give advice ® or information or the giving of incorrect advice or information, whether or not due to RPB ® Safety’s negligence or that of its employees, agents or subcontractors.
  • Page 24 Look no further than the . From the searing heat ® ™ of an Arizona summer to a severe Scandinavian winter the RPB ® ™ will keep you comfortable. AIRLINE FILTRATION The RPB RADEX AIRLINE ®...

Table of Contents