Table of Contents
Advertisement
Quick Links
Operating Instructions
FX-MX09
4x4 HDMI2.0 Matrix , 4k@60Hz YUV4:4:4
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual for
future reference.
ABLE OF CONTENTS
4 Package Contents
6 Connecting and Operating
www.foxunhd.com
Advertisement
Table of Contents
Related Manuals for foxunhd FX-MX09
Summary of Contents for foxunhd FX-MX09
-
Page 1: Table Of Contents
Operating Instructions FX-MX09 4x4 HDMI2.0 Matrix , 4k@60Hz YUV4:4:4 Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. -
Page 2: Feature
(including amplifiers) that produce heat. 5. Do not place sources of naked 10. Refer all servicing to flames, such as lighted candles, on qualified service personnel. the unit. www.foxunhd.com... -
Page 3: Introduction
L440 x W256 x H42 mm/ L17.3”xW10”xH1.65” Mass (Main Unit) 2.4kg Note: Specifications are subject to change without notice. Mass and dimensions are approximate. 4 PACKING CONTENTS Main unit. (FX-MX09) 12V DC Power Supply. 1x Remote controller. 4x IR_TX cable. 4x Wide Band IR RX Cable(38KHz~56KHz) - Page 4 Note:The “Lock” button will light when all the buttons are locked. Rear Panel ① LAN port ② RS232 port ③ HDMI input port ④ IR-RX ⑤IR-TX ⑥IR-Ext ⑦HDMI output port ⑧ Power input:DC12V www.foxunhd.com...
-
Page 5: Typical Application
Optional:Connect an Ethernet cable from the TCP/IP port on the matrix to a local area network. Connect 12V power supply to DC power socket Power on the matrix,HDMI sources and displays Attention: Insert / Extract cables gently. 7 Typical Application www.foxunhd.com... -
Page 6: Control
Connect the 4x4 Matrix to PC with a RS232 cable, open the software on your PC. On the COM Setting session, select the COM port according to your PC and click Connect to get connected. On this COM setting session, you can also change the Device name, Device name support up to 16 www.foxunhd.com... - Page 7 “Status” button, or Clear our historical operating record by clicking “Clear” button. The right down blank shows the operating history. Picture 1 The EDID session helps us to Read and Configure EDID for each input, such as HDR, 3D, Data rates and Audio channel. Picture 2 www.foxunhd.com...
- Page 8 The Net Config session allows us to configure the PC and Matrix in the same LAN with the IP Address and connection. Click “Net config” → “Connect” → “Search Device” → “Sel Device Number” →“Connect” then you can see the device name, it means connect successfully. Picture 4 www.foxunhd.com...
- Page 9 The last session is System Config, which allows power ON/OFF or reset, default the Matrix. Picture 6 8.4 Command Control 1) Open CommUart Assistant. 2) Comport setting: Baud Rate: 115200 bps Parity: None Data Bits: 8 bit Stop Bits: 1 bit www.foxunhd.com...
- Page 10 5) Select HDMI input for HDMI output Command Description Output1 Output2 Output3 Output4 All Output Input1 Input2 Input3 Input4 E.g: @W 00 00 #: Ouput 1 display Input1 Ouput 1 Input1 6)EDID Setting @W XX AA BB #: Parameter Description: www.foxunhd.com...
- Page 11 2）Open the PC tool (included in the CD). 3) Search the IP address of HDMI Matrix, please refer to picture 4 & picture 5. 4) Open the web browser and enter the IP address you searched, then you can set the function as below pictures: Picture8 www.foxunhd.com...
-
Page 12: Product Service
1) Damage requiring service: The unit should be serviced by qualified service personnel if: (a)The DC power supply cord or AC adaptor has been damaged; (b)Objects or liquids have gotten into the unit; (c)The unit has been exposed to rain; www.foxunhd.com... -
Page 13: Warranty
Factory Service center or other Authorized Servicer, or damage that is attributable to acts of God. www.foxunhd.com... - Page 14 The items listed are not exclusive, but are for illustration only. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. www.foxunhd.com...
Need help?
Do you have a question about the FX-MX09 and is the answer not in the manual?
Questions and answers