Advertisement
Ultimate Kit Set Up guide
**Please watch the Mushroom Growing Videos or read the Mushroom Grow Guide prior to setting this
kit up. The Mushroom Grow Guide along with all of our guides can be found by visiting these links.
Guides Library Page: http://www.midwestgrowkits.com/guides.html
Video Grow Guides: http://www.midwestgrowkits.com/videogrowguide.html
Before setting this kit up, you should have already injected your spores into the jars using one of the
methods in the growing guide. Now you are ready for the incubation period!
The Ultimate kit uses a "Forced Air" system with filtration. It differs from other kits which recommend a "shotgun" style
fruiting chamber, which is simply a container with many holes drilled. This system is superior because it allows growing in
any environment, even the dirtiest attic, closet or basement, while providing optimal air exchange!
This kit can be used for both incubation period and for fruiting.
Start by placing your fully submersible aquarium heater on the
bottom and use the suction cups to secure it. (**The aquari-
um heater must always be fully submerged in water when
plugged in to work properly!)
www.midwestgrowkits.com
Midwest Grow Kits Revision 9.0; 2018-2019
(Text included with videos)
Please Note:
Items not included: Extension cord and water
Next add water to one of the containers with around 6-7 gallons. (Regular tap
water is fine). The water level should be about 60% full. Double check that the
heater is secure and the suction cups are firmly in place on the bottom.
The New Ultimate Kit design is made with two identical modular containers
that fit together so extra containers can be added to expand your grow later if
desired. Save the extra lid for future use.
(800) 921-4717
Free Shipping !!
Orders over $99
Follow these simple setup instructions!
1
Advertisement
Table of Contents
Summary of Contents for Midwest grow kits Ultimate Kit
- Page 1 Please Note: The Ultimate kit uses a “Forced Air” system with filtration. It differs from other kits which recommend a “shotgun” style fruiting chamber, which is simply a container with many holes drilled. This system is superior because it allows growing in any environment, even the dirtiest attic, closet or basement, while providing optimal air exchange! This kit can be used for both incubation period and for fruiting.
- Page 2 The picture on the right is an example of the proper wa- ter level and placement of the aquarium heater. Next, plug in the aquarium heater and adjust the red dial on the heater to around 86-92 degrees to start. Float the other container in the water, place the digital thermome- ter inside the clear bin and close the lid.
- Page 3 YOU’RE FINISHED WITH THE INITIAL SETUP! Now sit back and wait for them to colonize. (23-35 days average. Some strains are faster than others) Look for the signs of germination around day 6-10. Then you will see white rhyzomorphic growth (spider web growth) for the next few weeks.
- Page 4 You are now ready to add your perlite! The perlite goes on the bottom of the inner chamber after you birth the jars. Per- lite evaporates water and this is what creates the high humidity levels needed. Mix with filtered water to get a moist mix. Don’t over saturate either.
- Page 5 Adding Light! The Ultimate Kit includes our new 36-diode custom dual spectrum HP LED Grow light that is the closest thing to actual sun- light we have found. We also include one battery LED light, operating at 6,000k. The battery light is optional and mainly used by closet growers without electricity available.
- Page 6 Once you see mushroom pins, increase the air pump system to 30 mins on and 30 mins off. Enjoy your harvests! Ultimate Kit Bulk Grow Pinning! Ultimate Kit with Jars Week 6! Need growing help? Email us at support@midwestgrowkits.com or call us (800) 921-4717 Mon-Fri 11am-5PM Central Time.
Need help?
Do you have a question about the Ultimate Kit and is the answer not in the manual?
Questions and answers